lkml.org 
[lkml]   [2013]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/3] pwm: pwm-tiecap: Add device-tree binding support for da850 SOC
Date
On Thu, Mar 14, 2013 at 17:13:08, Nori, Sekhar wrote:
> On 3/14/2013 4:02 PM, Philip Avinash wrote:
> > ECAP IP is used in da850 SOC's also. Hence adds ECAP device tree binding
> > support for da850.
> >
> > Cc: Grant Likely <grant.likely@secretlab.ca>
> > Cc: Rob Herring <rob.herring@calxeda.com>
> > Cc: Rob Landley <rob@landley.net>
> > Signed-off-by: Philip Avinash <avinashphilip@ti.com>
> > ---
> > :100644 100644 131e8c1... fcbd3c1... M Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
> > :100644 100644 22e96e2... e0d96c8... M drivers/pwm/pwm-tiecap.c
> > .../devicetree/bindings/pwm/pwm-tiecap.txt | 2 +-
> > drivers/pwm/pwm-tiecap.c | 1 +
> > 2 files changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
> > index 131e8c1..fcbd3c1 100644
> > --- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
> > +++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
> > @@ -1,7 +1,7 @@
> > TI SOC ECAP based APWM controller
> >
> > Required properties:
> > -- compatible: Must be "ti,am33xx-ecap"
> > +- compatible: Must be "ti,am33xx-ecap" or "ti,da850-ecap"
> > - #pwm-cells: Should be 3. Number of cells being used to specify PWM property.
> > First cell specifies the per-chip index of the PWM to use, the second
> > cell is the period in nanoseconds and bit 0 in the third cell is used to
> > diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
> > index 22e96e2..e0d96c8 100644
> > --- a/drivers/pwm/pwm-tiecap.c
> > +++ b/drivers/pwm/pwm-tiecap.c
> > @@ -197,6 +197,7 @@ static const struct pwm_ops ecap_pwm_ops = {
> >
> > static const struct of_device_id ecap_of_match[] = {
> > { .compatible = "ti,am33xx-ecap" },
> > + { .compatible = "ti,da850-ecap" },
> > {},
>
> You add a new compatible, but don't really show any changes in driver in
> this series. So why can't we simply use ti,am33xx-ecap on DA850 too?

Ok it can happily live with ti,am33xx-ecap. Hence this patch and next [1]patch
can be dropped.

1. [PATCH 3/3] pwm: pwm-tiehrpwm: Add device tree binding support for da850 SOC

Thanks
Avinash
>
> Thanks,
> Sekhar
>

\
 
 \ /
  Last update: 2013-03-14 14:21    [W:0.085 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site