lkml.org 
[lkml]   [2013]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 1/2] Input: atmel_mxt_ts - Support for touchpad variant
Hi Benson,

> From: Daniel Kurtz <djkurtz@chromium.org>
>
> This same driver can be used by atmel based touchscreens and touchpads
> (buttonpads). Platform data may specify a device is a touchpad
> using the is_tp flag.
>
> This will cause the driver to perform some touchpad specific
> initializations, such as:
> * register input device name "Atmel maXTouch Touchpad" instead of
> Touchscreen.
> * register BTN_LEFT & BTN_TOOL_* event types.
> * register axis resolution (as a fixed constant, for now)
> * register BUTTONPAD property
> * process GPIO buttons using reportid T19
>
> Input event GPIO mapping is done by the platform data key_map array.
>
> key_map[x] should contain the KEY or BTN code to send when processing
> GPIOx from T19. To specify a GPIO as not an input source, populate
> with KEY_RESERVED, or 0.
>
> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
> Signed-off-by: Benson Leung <bleung@chromium.org>
> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
> Tested-by: Olof Johansson <olof@lixom.net>
> ---
> v3: Add key_map array to map gpios to keys or buttons. Configure is_tp from
> pdata.
> v2: zero reportid in mxt_object_table_free(), Thanks nick.dyer@itdev.co.uk
> v1: Initial
> ---
> drivers/input/touchscreen/atmel_mxt_ts.c | 65 +++++++++++++++++++++++++++++++-
> include/linux/i2c/atmel_mxt_ts.h | 5 +++
> 2 files changed, 68 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> index d04f810..feafbb8 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -181,6 +181,12 @@
>
> #define MXT_FWRESET_TIME 175 /* msec */
>
> +/* MXT_SPT_GPIOPWM_T19 field */
> +#define MXT_GPIO0_MASK 0x04
> +#define MXT_GPIO1_MASK 0x08
> +#define MXT_GPIO2_MASK 0x10
> +#define MXT_GPIO3_MASK 0x20

Since these are not used individually, but treated as a bit field in
the code, a single bit index would suffice.

> +
> /* Command to unlock bootloader */
> #define MXT_UNLOCK_CMD_MSB 0xaa
> #define MXT_UNLOCK_CMD_LSB 0xdc
> @@ -212,6 +218,8 @@
> /* Touchscreen absolute values */
> #define MXT_MAX_AREA 0xff
>
> +#define MXT_PIXELS_PER_MM 20
> +
> struct mxt_info {
> u8 family_id;
> u8 variant_id;
> @@ -243,6 +251,8 @@ struct mxt_data {
> const struct mxt_platform_data *pdata;
> struct mxt_object *object_table;
> struct mxt_info info;
> + bool is_tp;
> +
> unsigned int irq;
> unsigned int max_x;
> unsigned int max_y;
> @@ -251,6 +261,7 @@ struct mxt_data {
> u8 T6_reportid;
> u8 T9_reportid_min;
> u8 T9_reportid_max;
> + u8 T19_reportid;
> };
>
> static bool mxt_object_readable(unsigned int type)
> @@ -502,6 +513,22 @@ static int mxt_write_object(struct mxt_data *data,
> return mxt_write_reg(data->client, reg + offset, val);
> }
>
> +static void mxt_input_button(struct mxt_data *data, struct mxt_message *message)
> +{
> + struct device *dev = &data->client->dev;
> + struct input_dev *input = data->input_dev;
> + bool button;
> + int i;
> +
> + /* Active-low switch */
> + for (i = 0; i < MXT_NUM_GPIO; i++) {
> + if (data->pdata->key_map[i] == KEY_RESERVED)
> + continue;
> + button = !(message->message[0] & MXT_GPIO0_MASK << i);

This looks unintended.

> + input_report_key(input, data->pdata->key_map[i], button);
> + }
> +}
> +
> static void mxt_input_touchevent(struct mxt_data *data,
> struct mxt_message *message, int id)
> {
> @@ -585,6 +612,9 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
> int id = reportid - data->T9_reportid_min;
> mxt_input_touchevent(data, &message, id);
> update_input = true;
> + } else if (message.reportid == data->T19_reportid) {
> + mxt_input_button(data, &message);
> + update_input = true;
> } else {
> mxt_dump_message(dev, &message);
> }
> @@ -764,6 +794,9 @@ static int mxt_get_object_table(struct mxt_data *data)
> data->T9_reportid_min = min_id;
> data->T9_reportid_max = max_id;
> break;
> + case MXT_SPT_GPIOPWM_T19:
> + data->T19_reportid = min_id;
> + break;
> }
> }
>
> @@ -777,7 +810,7 @@ static void mxt_free_object_table(struct mxt_data *data)
> data->T6_reportid = 0;
> data->T9_reportid_min = 0;
> data->T9_reportid_max = 0;
> -
> + data->T19_reportid = 0;
> }
>
> static int mxt_initialize(struct mxt_data *data)
> @@ -1115,9 +1148,13 @@ static int mxt_probe(struct i2c_client *client,
> goto err_free_mem;
> }
>
> - input_dev->name = "Atmel maXTouch Touchscreen";
> + data->is_tp = pdata && pdata->is_tp;
> +
> + input_dev->name = (data->is_tp) ? "Atmel maXTouch Touchpad" :
> + "Atmel maXTouch Touchscreen";
> snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
> client->adapter->nr, client->addr);
> +
> input_dev->phys = data->phys;
>
> input_dev->id.bustype = BUS_I2C;
> @@ -1140,6 +1177,29 @@ static int mxt_probe(struct i2c_client *client,
> __set_bit(EV_KEY, input_dev->evbit);
> __set_bit(BTN_TOUCH, input_dev->keybit);
>
> + if (data->is_tp) {
> + int i;
> + __set_bit(INPUT_PROP_POINTER, input_dev->propbit);
> + __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
> +
> + for (i = 0; i < MXT_NUM_GPIO; i++)
> + if (pdata->key_map[i] != KEY_RESERVED)
> + __set_bit(pdata->key_map[i], input_dev->keybit);
> +
> + __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
> + __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
> + __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
> + __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
> + __set_bit(BTN_TOOL_QUINTTAP, input_dev->keybit);
> +

It would be much preferred to have all these handled by input
_mt_init_slots() instead. For instance by adding the INPUT_MT_POINTER
flag. Also, the driver does not seem to handle touchpads properly, as
I cannot see the finger count sent anywhere.

> + input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
> + input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
> + input_abs_set_res(input_dev, ABS_MT_POSITION_X,
> + MXT_PIXELS_PER_MM);
> + input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
> + MXT_PIXELS_PER_MM);
> + }
> +
> /* For single touch */
> input_set_abs_params(input_dev, ABS_X,
> 0, data->max_x, 0, 0);
> @@ -1258,6 +1318,7 @@ static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
> static const struct i2c_device_id mxt_id[] = {
> { "qt602240_ts", 0 },
> { "atmel_mxt_ts", 0 },
> + { "atmel_mxt_tp", 0 },
> { "mXT224", 0 },
> { }
> };
> diff --git a/include/linux/i2c/atmel_mxt_ts.h b/include/linux/i2c/atmel_mxt_ts.h
> index f027f7a..99e379b 100644
> --- a/include/linux/i2c/atmel_mxt_ts.h
> +++ b/include/linux/i2c/atmel_mxt_ts.h
> @@ -15,6 +15,9 @@
>
> #include <linux/types.h>
>
> +/* For key_map array */
> +#define MXT_NUM_GPIO 4
> +
> /* Orient */
> #define MXT_NORMAL 0x0
> #define MXT_DIAGONAL 0x1
> @@ -39,6 +42,8 @@ struct mxt_platform_data {
> unsigned int voltage;
> unsigned char orient;
> unsigned long irqflags;
> + bool is_tp;
> + const unsigned int key_map[MXT_NUM_GPIO];
> };
>
> #endif /* __LINUX_ATMEL_MXT_TS_H */
> --
> 1.8.1.3
>

Thanks,
Henrik


\
 
 \ /
  Last update: 2013-03-10 10:41    [W:0.081 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site