lkml.org 
[lkml]   [2013]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 08/14] USB: ehci-omap: Add device tree support and binding information
Date
Allows the OMAP EHCI controller to be specified via device tree.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
---
.../devicetree/bindings/usb/omap-ehci.txt | 34 ++++++++++++++++++
drivers/usb/host/ehci-omap.c | 36 +++++++++++++++++++-
2 files changed, 69 insertions(+), 1 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/omap-ehci.txt

diff --git a/Documentation/devicetree/bindings/usb/omap-ehci.txt b/Documentation/devicetree/bindings/usb/omap-ehci.txt
new file mode 100644
index 0000000..b00a654
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/omap-ehci.txt
@@ -0,0 +1,34 @@
+OMAP HS USB EHCI controller
+
+This device is usually the child of the omap-usb-host
+Documentation/devicetree/bindings/mfd/omap-usb-host.txt
+
+Required properties:
+
+- compatible: should be "ti,ehci-omap"
+- reg: should contain one register range i.e. start and length
+- interrupt-parent: phandle to the interrupt controller
+- interrupts: description of the interrupt line
+
+Optional properties:
+
+- phys: list of phandles to PHY nodes.
+ This property is required if at least one of the ports are in
+ PHY mode i.e. OMAP_EHCI_PORT_MODE_PHY
+
+To specify the port mode, see
+Documentation/devicetree/bindings/mfd/omap-usb-host.txt
+
+Example for OMAP4:
+
+usbhsehci: ehci@4a064c00 {
+ compatible = "ti,ehci-omap", "usb-ehci";
+ reg = <0x4a064c00 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 77 0x4>;
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy 0 &hsusb3_phy>;
+};
+
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 02a7893..a8ce10d 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -48,6 +48,8 @@
#include <linux/clk.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
+#include <linux/of.h>
+#include <linux/dma-mapping.h>

#include "ehci.h"

@@ -121,6 +123,8 @@ static const struct ehci_driver_overrides ehci_omap_overrides __initdata = {
.extra_priv_size = sizeof(struct omap_hcd),
};

+static u64 omap_ehci_dma_mask = DMA_BIT_MASK(32);
+
/**
* ehci_hcd_omap_probe - initialize TI-based HCDs
*
@@ -148,6 +152,17 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
return -ENODEV;
}

+ /* For DT boot, get platform data from parent. i.e. usbhshost */
+ if (dev->of_node) {
+ pdata = dev->parent->platform_data;
+ dev->platform_data = pdata;
+ }
+
+ if (!pdata) {
+ dev_err(dev, "Missing platform data\n");
+ return -ENODEV;
+ }
+
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(dev, "EHCI irq failed\n");
@@ -161,6 +176,14 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
return -EADDRNOTAVAIL;
}

+ /*
+ * Right now device-tree probed devices don't get dma_mask set.
+ * Since shared usb code relies on it, set it here for now.
+ * Once we have dma capability bindings this can go away.
+ */
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &omap_ehci_dma_mask;
+
hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
dev_name(dev));
if (!hcd) {
@@ -185,7 +208,10 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
continue;

/* get the PHY device */
- phy = devm_usb_get_phy_dev(dev, i);
+ if (dev->of_node)
+ phy = devm_usb_get_phy_by_phandle(dev, "phys", i);
+ else
+ phy = devm_usb_get_phy_dev(dev, i);
if (IS_ERR(phy) || !phy) {
ret = IS_ERR(phy) ? PTR_ERR(phy) : -ENODEV;
dev_err(dev, "Can't get PHY device for port %d: %d\n",
@@ -275,6 +301,13 @@ static void ehci_hcd_omap_shutdown(struct platform_device *pdev)
hcd->driver->shutdown(hcd);
}

+static const struct of_device_id omap_ehci_dt_ids[] = {
+ { .compatible = "ti,ehci-omap" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, omap_ehci_dt_ids);
+
static struct platform_driver ehci_hcd_omap_driver = {
.probe = ehci_hcd_omap_probe,
.remove = ehci_hcd_omap_remove,
@@ -283,6 +316,7 @@ static struct platform_driver ehci_hcd_omap_driver = {
/*.resume = ehci_hcd_omap_resume, */
.driver = {
.name = hcd_name,
+ .of_match_table = of_match_ptr(omap_ehci_dt_ids),
}
};

--
1.7.4.1


\
 
 \ /
  Last update: 2013-02-07 18:46    [W:0.198 / U:1.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site