lkml.org 
[lkml]   [2013]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] usb: gadget: make usb functions to load before gadget driver
Date
The current ordering in makefile makes gadget drivers to be loaded
before usb functions making usb_get_function_instance() to fail when the
modules are *built-in* the kernel.
Changed the ordering here so that USB functions are loaded before gadget
drivers.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/usb/gadget/Makefile | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 97a13c3..82fb225 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -35,6 +35,12 @@ mv_udc-y := mv_udc_core.o
obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o
obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o

+# USB Functions
+obj-$(CONFIG_USB_F_ACM) += f_acm.o
+f_ss_lb-y := f_loopback.o f_sourcesink.o
+obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o
+obj-$(CONFIG_USB_U_SERIAL) += u_serial.o
+
#
# USB gadget drivers
#
@@ -74,9 +80,3 @@ obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o
obj-$(CONFIG_USB_G_NCM) += g_ncm.o
obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o
obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o
-
-# USB Functions
-obj-$(CONFIG_USB_F_ACM) += f_acm.o
-f_ss_lb-y := f_loopback.o f_sourcesink.o
-obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o
-obj-$(CONFIG_USB_U_SERIAL) += u_serial.o
--
1.7.10.4


\
 
 \ /
  Last update: 2013-02-06 10:42    [W:2.066 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site