lkml.org 
[lkml]   [2013]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/8] ARM: dts: omap5: Add omap control usb data
Date
Add omap control usb data in omap5 device tree file. This will have the
register address of registers to power on the USB2 PHY and USB3 PHY. The
information for the node added here is available in
Documentation/devicetree/bindings/usb/omap-usb.txt

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/omap5.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 790bb2a..c937500 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -496,5 +496,13 @@
hw-caps-ll-interface;
hw-caps-temp-alert;
};
+
+ omap_control_usb: omap-control-usb@4a002300 {
+ compatible = "ti,omap-control-usb";
+ reg = <0x4a002300 0x4>,
+ <0x4a002370 0x4>;
+ reg-names = "control_dev_conf", "phy_power_usb";
+ ti,type = <2>;
+ };
};
};
--
1.7.10.4


\
 
 \ /
  Last update: 2013-02-06 17:21    [W:0.086 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site