lkml.org 
[lkml]   [2013]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Subject[-next-20130204] usb/hcd: irq 18: nobody cared
From
Date
With -next-20130204:

[ 33.855570] irq 18: nobody cared (try booting with the "irqpoll" option)
[ 33.855580] Pid: 0, comm: swapper/4 Not tainted 3.8.0-next-20130204-xeon #20130204
[ 33.855582] Call Trace:
[ 33.855585] <IRQ> [<ffffffff810f1076>] __report_bad_irq+0x36/0xe0
[ 33.855600] [<ffffffff810f152a>] note_interrupt+0x1aa/0x200
[ 33.855606] [<ffffffff8101edf2>] ? mwait_idle+0x82/0x1b0
[ 33.855610] [<ffffffff810eed89>] handle_irq_event_percpu+0xc9/0x260
[ 33.855614] [<ffffffff810eef68>] handle_irq_event+0x48/0x70
[ 33.855618] [<ffffffff810f20ba>] handle_fasteoi_irq+0x5a/0x100
[ 33.855624] [<ffffffff810182f2>] handle_irq+0x22/0x40
[ 33.855630] [<ffffffff816e2a9a>] do_IRQ+0x5a/0xd0
[ 33.855636] [<ffffffff816d97ad>] common_interrupt+0x6d/0x6d
[ 33.855638] <EOI> [<ffffffff810f8e2a>] ? rcu_eqs_enter_common+0x4a/0x320
[ 33.855646] [<ffffffff8101edf2>] ? mwait_idle+0x82/0x1b0
[ 33.855649] [<ffffffff8101ed99>] ? mwait_idle+0x29/0x1b0
[ 33.855653] [<ffffffff8101f8a6>] cpu_idle+0x116/0x130
[ 33.855658] [<ffffffff816c0c0f>] start_secondary+0x251/0x258
[ 33.855660] handlers:
[ 33.855664] [<ffffffff814f98a0>] usb_hcd_irq
[ 33.855667] Disabling IRQ #18

From earlier in the boot log:
[ 1.297020] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.297032] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.297040] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.297076] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 1.297213] hub 4-0:1.0: USB hub found
[ 1.297221] hub 4-0:1.0: 2 ports detected

lsusb:
...
Bus 004 Device 002: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS
Bus 004 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
...

Didn't have this problem with -next-20120125. One of these commits, maybe?
next/drivers/usb/core$ git log --oneline next-20130125..next-20130204 -- *
2c2e865 usb: forbid memory allocation with I/O during bus reset
e9121a8 Merge remote-tracking branch 'usb/usb-next'
3b2ab2b Revert "usb: Register usb port's acpi power resources"
da0aa71 USB: add usb_hcd_{start,end}_port_resume
192fef1 usb: enable usb port device's async suspend.
f6cced1 usb: expose usb port's pm qos flags to user space
ad493e5 usb: add usb port auto power off mechanism
971fcd4 usb: add runtime pm support for usb port device
88bb965 usb: Register usb port's acpi power resources
54a3ac0 usb: Using correct way to clear usb3.0 device's remote wakeup feature.

I didn't see any changes in the drivers/hid/hid-logitech-dj.c or usbhid
but maybe it's doing something wrong anyway?

I'll open a bugzilla if a bunch more info is necessary.

Regards,
Peter Hurley





\
 
 \ /
  Last update: 2013-02-05 19:21    [W:0.078 / U:2.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site