Messages in this thread | | | Date | Mon, 4 Feb 2013 10:58:46 +0530 | From | Sekhar Nori <> | Subject | Re: [PATCH v2 6/6] ARM: davinci: da850: configure system configuration chip(CFGCHIP3) for emac |
| |
On 2/3/2013 6:15 PM, Sekhar Nori wrote: > On 1/28/2013 7:17 PM, Prabhakar Lad wrote: >> From: Lad, Prabhakar <prabhakar.lad@ti.com>
> There are couple of issues with this implementation. > > 1) da8xx_config_emac() is specific to DA850 EVM, but masquerades as > generic for da8xx. Looks like you need two functions, one for soc > specific configuration and one board specific. > 2) da8xx_config_emac() goes through all the time, whether the > particular board has emac module or not. Shouldn't > da8xx_config_emac() check if emac is actually enabled in the passed > dtb and only the do the configuration? > 3) The function assumes mii is used always, you can use the rmii_en dt > property to check if rmii/mii is enabled and configure the soc/board > accordingly. > 4) If the same function can work both for da850 and da830, then it can > be implemented outside of CONFIG_ARCH_DAVINCI_DA850.
Another thing I forgot to mention:
5) This patch replicates a lot of code form board-da850-evm.c. This needs to be avoided. May be create function to configure emac in da850.c. This can then be called in board-da850-evm.c as well as in the dt case.
Thanks, Sekhar
| |