lkml.org 
[lkml]   [2013]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: Uhhuh. NMI received for unknown reason 2c on CPU 0.
Date
On Sunday, February 03, 2013 03:46:56 PM Borislav Petkov wrote:
> On Sun, Feb 03, 2013 at 12:04:46AM +0100, Rafael J. Wysocki wrote:
> > The [2/5] is at: https://patchwork.kernel.org/patch/2001211/
> >
> > The other two are attached. I suppose the ordering doesn't matter.
>
> Ok, the eth link cable hotplugging issue seems fixed, plugging and
> unplugging the cable works as expected.

Cool, thanks.

> The issue I triggered earlier:
>
> > BUT(!), if I start powertop and set all tunables in the "Tunables" tab
> > to "Good", then suspend to disk, when I resume I get the NMI and this
> > time the unknown reason is 0x3c.
>
> ... still happens:
>
> [ 123.250870] PM: Creating hibernation image:
> [ 123.504940] PM: Need to copy 95667 pages <--- suspend to disk
> [ 123.252841] Enabling non-boot CPUs ... <--- resume
> [ 123.254021] SMP alternatives: lockdep: fixing up alternatives
> [ 123.254026] smpboot: Booting Node 0 Processor 1 APIC 0x1
> [ 123.275566] CPU1 is up
> [ 123.275697] SMP alternatives: lockdep: fixing up alternatives
> [ 123.275699] smpboot: Booting Node 0 Processor 2 APIC 0x2
> [ 123.297581] CPU2 is up
> [ 123.297699] SMP alternatives: lockdep: fixing up alternatives
> [ 123.297701] smpboot: Booting Node 0 Processor 3 APIC 0x3
> [ 123.319358] CPU3 is up
> [ 123.321928] i915 0000:00:02.0: power state changed by ACPI to D0
> [ 123.321992] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
> [ 123.333256] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0
> [ 123.344541] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
> [ 123.345012] sdhci-pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
> [ 123.345744] PM: noirq restore of devices complete after 24.061 msecs
> [ 123.346684] PM: early restore of devices complete after 0.836 msecs
> [ 123.389863] i915 0000:00:02.0: setting latency timer to 64
> [ 123.389870] xhci_hcd 0000:00:14.0: setting latency timer to 64
> [ 123.389887] ehci-pci 0000:00:1a.0: setting latency timer to 64
> [ 123.389907] usb usb3: root hub lost power or was reset
> [ 123.389908] usb usb1: root hub lost power or was reset
> [ 123.389909] usb usb2: root hub lost power or was reset
> [ 123.390034] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
> [ 123.390171] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X
> [ 123.390308] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
> [ 123.391013] ehci-pci 0000:00:1d.0: setting latency timer to 64
> [ 123.391038] usb usb4: root hub lost power or was reset
> [ 123.393798] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
> [ 123.394115] ahci 0000:00:1f.2: setting latency timer to 64
> [ 123.394229] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
> [ 123.394923] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
> [ 123.697314] usb 3-1: reset high-speed USB device number 2 using ehci-pci
> [ 123.698252] ata2: SATA link down (SStatus 0 SControl 300)
> [ 123.699286] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
> [ 123.701259] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 123.701287] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [ 123.701291] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [ 123.702699] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [ 123.702703] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [ 123.703222] ata5: SATA link down (SStatus 0 SControl 300)
> [ 123.704603] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [ 123.704606] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [ 123.705938] ata3.00: configured for UDMA/100
> [ 123.706033] sd 2:0:0:0: [sdb] Starting disk
> [ 123.706041] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
> [ 123.706045] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
> [ 123.735336] ata1.00: configured for UDMA/133
> [ 123.735662] sd 0:0:0:0: [sda] Starting disk
> [ 123.912740] usb 4-1: reset high-speed USB device number 2 using ehci-pci
> [ 124.129520] PM: restore of devices complete after 741.589 msecs
> [ 124.174684] Restarting tasks ... done.
> [ 124.177521] video LNXVIDEO:00: Restoring backlight state
> [ 124.186033] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold
> [ 124.214931] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold
> [ 124.214970] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold
> [ 124.394882] Uhhuh. NMI received for unknown reason 3c on CPU 0. <--- FUN.
> [ 124.394890] Do you have a strange power saving mode enabled?
> [ 124.394892] Dazed and confused, but trying to continue
> [ 124.407438] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
> [ 127.035581] ehci-pci 0000:00:1a.0: power state changed by ACPI to D0
> [ 127.135668] ehci-pci 0000:00:1a.0: setting latency timer to 64
> [ 127.135910] ehci-pci 0000:00:1d.0: power state changed by ACPI to D0
> [ 127.146500] ehci-pci 0000:00:1a.0: power state changed by ACPI to D3cold
> [ 127.236381] ehci-pci 0000:00:1d.0: setting latency timer to 64
> [ 127.236658] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
> [ 127.247244] ehci-pci 0000:00:1d.0: power state changed by ACPI to D3cold
> [ 127.337137] xhci_hcd 0000:00:14.0: setting latency timer to 64
> [ 127.348286] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
> [ 127.348975] xhci_hcd 0000:00:14.0: power state changed by ACPI to D3cold
> [ 129.255203] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
> [ 129.255215] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO

Is suspend-to-RAM triggering that as too?

Rafael


--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.


\
 
 \ /
  Last update: 2013-02-03 21:41    [W:0.155 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site