lkml.org 
[lkml]   [2013]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Serial port initialization broken on Armada 370/XP due to "serial: 8250_dw: Don't use UPF_FIXED_TYPE"
Hi,

On Thu, Feb 28, 2013 at 12:42:06PM +0100, Gregory CLEMENT wrote:
> >> Would you agree with this kind of patch to fix the issue?
> >>
> >> diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
> >> index e2ac25a..0b284c6 100644
> >> --- a/drivers/tty/serial/8250/8250.c
> >> +++ b/drivers/tty/serial/8250/8250.c
> >> @@ -1119,7 +1119,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
> >> serial_out(up, UART_LCR, 0);
> >>
> >> serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
> >> - scratch = serial_in(up, UART_IIR) >> 6;
> >> + scratch = (serial_in(up, UART_IIR) & 0xFF) >> 6;
> >>
> >> switch (scratch) {
> >> case 0:
> >
> > Instead, can you test if it's enough for you to set the reg-io-width
> > to 1 instead of 4:
>
> Yes indeed it worked and it seems to be the correct description of my
> hardware. So I will fix the dtsi file.
>
> However isn't buggy to use a function as it returned a char whereas
> it returns an int?

Yes, the driver should probable be cleaned.

It seems to be happening in quite a few places in 8250.c.
autoconfig_16550a() has pretty much identical code in it, where
UART_IIR is read to unsigned char and shifted without a mask.

Br,

--
heikki


\
 
 \ /
  Last update: 2013-02-28 14:01    [W:0.238 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site