lkml.org 
[lkml]   [2013]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 4/4] ARM: timer-sp: Set dynamic irq affinity
From
On 27 February 2013 10:26, Santosh Shilimkar <santosh.shilimkar@ti.com> wrote:
> On Wednesday 27 February 2013 03:47 AM, Daniel Lezcano wrote:
>>
>> From: Viresh Kumar <viresh.kumar@linaro.org>
>>
>> When a cpu goes to a deep idle state where its local timer is shutdown, it
>> notifies the time frame work to use the broadcast timer instead.
>>
>> Unfortunately, the broadcast device could wake up any CPU, including an
>> idle one
>> which is not concerned by the wake up at all.
>>
> Broad-cast device will only open the CPU for which the timer IRQ
> affined to. And infact with subject series the affinity also is
> updated for the CPU which owns the last timer expiry event.
>
> What am I missing here ?

Dynamic affinity will work only if the following flag is set for a
clock_event_device: CLOCK_EVT_FEAT_DYNIRQ, otherwise wakeup
would happen on the cpu to which static affinity was set to.


\
 
 \ /
  Last update: 2013-02-27 06:43    [W:0.052 / U:1.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site