lkml.org 
[lkml]   [2013]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/4] regulator: lp8788-ldo: use ena_pin of regulator-core for external control
Date

Regulator core driver provides enable GPIO control for enabling/disabling a
regulator. Now, enable GPIO is shared among regulators.
Use this internal working, so unnecessary code are removed.
GPIO enable pin configurations are added in digital LDO and analog LDO drivers.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
---
drivers/regulator/lp8788-ldo.c | 98 +++++++---------------------------------
1 file changed, 17 insertions(+), 81 deletions(-)

diff --git a/drivers/regulator/lp8788-ldo.c b/drivers/regulator/lp8788-ldo.c
index cd5a14a..fcba90a 100644
--- a/drivers/regulator/lp8788-ldo.c
+++ b/drivers/regulator/lp8788-ldo.c
@@ -184,40 +184,6 @@ static enum lp8788_ldo_id lp8788_aldo_id[] = {
ALDO10,
};

-static int lp8788_ldo_enable(struct regulator_dev *rdev)
-{
- struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
-
- if (ldo->en_pin) {
- gpio_set_value(ldo->en_pin->gpio, ENABLE);
- return 0;
- } else {
- return regulator_enable_regmap(rdev);
- }
-}
-
-static int lp8788_ldo_disable(struct regulator_dev *rdev)
-{
- struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
-
- if (ldo->en_pin) {
- gpio_set_value(ldo->en_pin->gpio, DISABLE);
- return 0;
- } else {
- return regulator_disable_regmap(rdev);
- }
-}
-
-static int lp8788_ldo_is_enabled(struct regulator_dev *rdev)
-{
- struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
-
- if (ldo->en_pin)
- return gpio_get_value(ldo->en_pin->gpio) ? 1 : 0;
- else
- return regulator_is_enabled_regmap(rdev);
-}
-
static int lp8788_ldo_enable_time(struct regulator_dev *rdev)
{
struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
@@ -253,17 +219,17 @@ static struct regulator_ops lp8788_ldo_voltage_table_ops = {
.list_voltage = regulator_list_voltage_table,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
- .enable = lp8788_ldo_enable,
- .disable = lp8788_ldo_disable,
- .is_enabled = lp8788_ldo_is_enabled,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
.enable_time = lp8788_ldo_enable_time,
};

static struct regulator_ops lp8788_ldo_voltage_fixed_ops = {
.get_voltage = lp8788_ldo_fixed_get_voltage,
- .enable = lp8788_ldo_enable,
- .disable = lp8788_ldo_disable,
- .is_enabled = lp8788_ldo_is_enabled,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
.enable_time = lp8788_ldo_enable_time,
};

@@ -535,43 +501,10 @@ static struct regulator_desc lp8788_aldo_desc[] = {
},
};

-static int lp8788_gpio_request_ldo_en(struct platform_device *pdev,
- struct lp8788_ldo *ldo,
- enum lp8788_ext_ldo_en_id id)
-{
- struct device *dev = &pdev->dev;
- struct lp8788_ldo_enable_pin *pin = ldo->en_pin;
- int ret, gpio, pinstate;
- char *name[] = {
- [EN_ALDO1] = "LP8788_EN_ALDO1",
- [EN_ALDO234] = "LP8788_EN_ALDO234",
- [EN_ALDO5] = "LP8788_EN_ALDO5",
- [EN_ALDO7] = "LP8788_EN_ALDO7",
- [EN_DLDO7] = "LP8788_EN_DLDO7",
- [EN_DLDO911] = "LP8788_EN_DLDO911",
- };
-
- gpio = pin->gpio;
- if (!gpio_is_valid(gpio)) {
- dev_err(dev, "invalid gpio: %d\n", gpio);
- return -EINVAL;
- }
-
- pinstate = pin->init_state;
- ret = devm_gpio_request_one(dev, gpio, pinstate, name[id]);
- if (ret == -EBUSY) {
- dev_warn(dev, "gpio%d already used\n", gpio);
- return 0;
- }
-
- return ret;
-}
-
static int lp8788_config_ldo_enable_mode(struct platform_device *pdev,
struct lp8788_ldo *ldo,
enum lp8788_ldo_id id)
{
- int ret;
struct lp8788 *lp = ldo->lp;
struct lp8788_platform_data *pdata = lp->pdata;
enum lp8788_ext_ldo_en_id enable_id;
@@ -613,14 +546,7 @@ static int lp8788_config_ldo_enable_mode(struct platform_device *pdev,
goto set_default_ldo_enable_mode;

ldo->en_pin = pdata->ldo_pin[enable_id];
-
- ret = lp8788_gpio_request_ldo_en(pdev, ldo, enable_id);
- if (ret) {
- ldo->en_pin = NULL;
- goto set_default_ldo_enable_mode;
- }
-
- return ret;
+ return 0;

set_default_ldo_enable_mode:
return lp8788_update_bits(lp, LP8788_EN_SEL, en_mask[enable_id], 0);
@@ -644,6 +570,11 @@ static int lp8788_dldo_probe(struct platform_device *pdev)
if (ret)
return ret;

+ if (ldo->en_pin) {
+ cfg.ena_gpio = ldo->en_pin->gpio;
+ cfg.ena_gpio_flags = ldo->en_pin->init_state;
+ }
+
cfg.dev = pdev->dev.parent;
cfg.init_data = lp->pdata ? lp->pdata->dldo_data[id] : NULL;
cfg.driver_data = ldo;
@@ -700,6 +631,11 @@ static int lp8788_aldo_probe(struct platform_device *pdev)
if (ret)
return ret;

+ if (ldo->en_pin) {
+ cfg.ena_gpio = ldo->en_pin->gpio;
+ cfg.ena_gpio_flags = ldo->en_pin->init_state;
+ }
+
cfg.dev = pdev->dev.parent;
cfg.init_data = lp->pdata ? lp->pdata->aldo_data[id] : NULL;
cfg.driver_data = ldo;
--
1.7.9.5

Best Regards,
Milo




\
 
 \ /
  Last update: 2013-02-18 08:42    [W:0.038 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site