lkml.org 
[lkml]   [2013]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: Query related to MSR(Magnetic Stripe Reader) Device Driver
From
Hi Greg,

On Thu, Jan 31, 2013 at 11:09 AM, Priyaranjan Das
<priyaranjan456789@gmail.com> wrote:
> Hi Greg,
>
> On Tue, Jan 29, 2013 at 7:03 PM, Greg KH <gregkh@linuxfoundation.org> wrote:
>> On Mon, Jan 28, 2013 at 03:25:08PM +0530, Priyaranjan Das wrote:
>>> Hi Greg,
>>>
>>> On Tue, Jan 22, 2013 at 10:06 PM, Greg KH <gregkh@linuxfoundation.org> wrote:
>>> > On Tue, Jan 22, 2013 at 03:02:32PM +0530, Priyaranjan Das wrote:
>>> >> Hi All,
>>> >>
>>> >> I am working on MSR(Magnetic Stripe Reader) for a product . I wish to
>>> >> know whether any MSR( Magnetic Stripe/card Reader) driver is available
>>> >> in the current source or not. I need this for reference. Could anyone
>>> >> please help me?
>>> >
>>> > Most of these types of devices that I have worked with always show up as
>>> > a keyboard device (ps/2 pass-through or a USB hid device.) What type of
>>> > interface does your device present to the operating system?
>>> >
>>>
>>> The MSR will be a part of a SoC. It is a memory mapped device hence
>>> there is no interface like USB.
>>
>> Ok, that's different. But how will your driver want to communicate the
>> reader data to userspace? That will probably determine where you want
>> to put it.
>>
>> I would recommend making it an input device and sending keystrokes that
>> you read from the card, so you can properly integrate into userspace
>> applications that are used to using a card reader.
>>
>>> MSR IP contains an ADC which the driver will read and interpret the
>>> data. I am planning to write a Driver for the same. Will this driver
>>> fall under drivers/mfd/* ?
>>
>> As per the above, I would think drivers/input/ wouldn't you?
>>
>> Hope this helps,
>>
>
> Thanks for your help!.
>
> Yes, you are right, it should be under drivers/input.
> I am trying to prepare the design right now.
>
>

The MSR IP can be also be used either as a general purpose ADC or in
Magnetic stripe card reader mode.The IP supports both the modes and
provides FIFO for storing ADC data.

I also got to know about IIO subsystem where ADC drivers are
implemented. Our use-case will be to use either Magnetic Stripe reader
mode or general purpose ADC mode in a given configuration. Can I use
IIO subsystem for the Magnetic Stripe driver?

Regards,
Priyaranjan


\
 
 \ /
  Last update: 2013-02-15 13:01    [W:0.066 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site