lkml.org 
[lkml]   [2013]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/9] clk: sunxi: remove stale Makefile entry
Date
Patch 85a18198 "clk: sunxi: Use common of_clk_init() function"
removed the clk-sunxi.c file but left the Makefile entry, which
causes a build error in multi_v7_defconfig:

make[4]: *** No rule to make target `drivers/clk/clk-sunxi.o', needed by `drivers/clk/built-in.o'.

The obvious fix is to remove the extraneous line from the
Makefile.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Prashant Gaikwad <pgaikwad@nvidia.com>
Cc: Maxime Ripard <maxime.ripard@anandra.org>
Cc: Mike Turquette <mturquette@linaro.org>
---
drivers/clk/Makefile | 1 -
1 file changed, 1 deletion(-)

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index ce77077..be9392e 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -25,7 +25,6 @@ endif
obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o
obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
-obj-$(CONFIG_ARCH_SUNXI) += clk-sunxi.o
obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o
obj-$(CONFIG_X86) += x86/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
--
1.8.1.2


\
 
 \ /
  Last update: 2013-02-15 00:02    [W:0.163 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site