lkml.org 
[lkml]   [2013]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [3.8-rc7] PCI hotplug wakeup oops
From
On 12 February 2013 03:49, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> On Monday, February 11, 2013 08:27:49 PM Rafael J. Wysocki wrote:
>> On Monday, February 11, 2013 12:01:37 PM Bjorn Helgaas wrote:
>> > [+cc Rafael]
>> >
>> > On Mon, Feb 11, 2013 at 10:08 AM, Daniel J Blueman <daniel@quora.org> wrote:
>> > > On 11 February 2013 21:03, Daniel J Blueman <daniel@quora.org> wrote:
>> > >> With 3.8-rc7, when unplugging the Thunderbolt ethernet adapter (bus 0a
>> > >> [1]) on a Macbook Pro 10,1, we see the PCIe port correctly released:
>> > >>
>> > >> pciehp 0000:06:03.0:pcie24: Card not present on Slot(3)
>> > >> tg3 0000:0a:00.0: tg3_abort_hw timed out, TX_MODE_ENABLE will not
>> > >> clear MAC_TX_MODE=ffffffff
>> > >> tg3 0000:0a:00.0 eth0: No firmware running
>> > >> tg3 0000:0a:00.0 eth0: Link is down
>> > >> [sched_delayed] sched: RT throttling activated
>> > >> pcieport 0000:00:01.1: System wakeup enabled by ACPI
>> > >> pciehp 0000:09:00.0:pcie24: unloading service driver pciehp
>> > >> pci_bus 0000:0a: busn_res: [bus 0a] is released
>> > >> pci_bus 0000:09: busn_res: [bus 09-0a] is released
>> > >>
>> > >> After some activity later (eg I can reproduce this by switching to a
>> > >> text console and back), often we'll see an oops:
>> > >>
>> > >> Unable to handle kernel paging request at 0000000000001070
>> > >> pci_pme_list_scan+0x3d/0xe0
>> > >> Call Trace:
>> > >> process_one_work+0x193
>> > >> ? process_one_work+0x131
>> > >> ? pci_pme_wakeup+0x60
>> > >> worker_thread+0x15d
>> > >>
>> > >> (gdb) list *(pci_pme_list_scan+0x3d)
>> > >> 0xffffffff8123f6dd is in pci_pme_list_scan (drivers/pci/pci.c:1556).
>> > >> 1551 /*
>> > >> 1552 * If bridge is in low power state, the
>> > >> 1553 * configuration space of subordinate devices
>> > >> 1554 * may be not accessible
>> > >> 1555 */
>> > >> 1556 if (bridge && bridge->current_state != PCI_D0)
>> > >> 1557 continue;
>> > >> 1558 pci_pme_wakeup(pme_dev->dev, NULL);
>> > >> 1559 } else {
>> > >> 1560 list_del(&pme_dev->list);
>> > >>
>> > >> Since a panic in vsnprintf happens after the oops (hence I can't catch
>> > >> it with EFI pstore), it is almost certainly significant heap
>> > >> corruption; this would explain why pme_dev became null (the load has
>> > >> been ordered ahead).
>> > >>
>> > >> I'll see what I can find out with memory poisoning and list debugging.
>> > >
>> > > Enabling a bunch of related debugging, we see pme_dev is non-null and:
>> > >
>> > > BUG: Unable to handle NULL pointer dereference at
>> > > pci_bus_read_config_word+0x6c
>> > > PGD 26314c067 PUD 2633f9067 PMD 0
>> > > Oops: 0000 [#1] SMP
>> > > pci_check_pme_status+0x4f
>> > > pci_pme_wakeup+0x21
>> > > pci_pme_list_scan+0xd5
>> > > process_one_work+0x1ca
>> > > ? process_one_work+0x160
>> > > ? pci_pme_wakeup+0x60
>> > > worker_thread+0x14e
>> > >
>> > > Anyway, it looks like the device being unplugged wasn't removed from
>> > > pci_pme_list as pci_pme_active(dev, false) wasn't called.
>> > >
>> > > From a quick review, I wasn't able to find the right place in the
>> > > call-chain which I only see releases the child busses and PCIe port
>> > > drivers. Anyone?
>> >
>> > It looks like drivers *add* devices to pci_pme_list when they use
>> > pci_enable_wake() or pci_wake_from_d3(). But many drivers never
>> > remove their devices, and I don't see any place where the core does it
>> > either. My guess is we need to remove it in pci_stop_dev() (we
>> > already do pcie_aspm_exit_link_state() there) or somewhere similar.
>>
>> Yes, we should call pci_pme_active(dev, false) somewhere in there I think.
>> It's fine to call that even if PME was not "active" before.
>
> Daniel, I wonder if the patch below helps?
>
> Rafael
>
>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> drivers/pci/remove.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> Index: test/drivers/pci/remove.c
> ===================================================================
> --- test.orig/drivers/pci/remove.c
> +++ test/drivers/pci/remove.c
> @@ -19,6 +19,8 @@ static void pci_free_resources(struct pc
>
> static void pci_stop_dev(struct pci_dev *dev)
> {
> + pci_pme_active(dev, false);
> +
> if (dev->is_added) {
> pci_proc_detach_device(dev);
> pci_remove_sysfs_dev_files(dev);

Indeed, the oops would prevent hitting the lockdep warning, which is a
secondary matter.

As it stands, this fix prevents the fatal oops, so IMHO is urgent
material for 3.8-final. I can't prove that is_added will always be
true, so let's stick with your patch.

Tested-by: Daniel J Blueman <daniel@quora.org>
--
Daniel J Blueman


\
 
 \ /
  Last update: 2013-02-13 16:01    [W:0.773 / U:0.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site