lkml.org 
[lkml]   [2013]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 4/4] drivers: usb: start using the control module driver
* Felipe Balbi <balbi@ti.com> [130125 02:30]:
> Hi,
>
> On Fri, Jan 25, 2013 at 03:54:00PM +0530, Kishon Vijay Abraham I wrote:
> > Start using the control module driver for powering on the PHY and for
> > writing to the mailbox instead of writing to the control module
> > registers on their own.
> >
> > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> > ---
> > Documentation/devicetree/bindings/usb/omap-usb.txt | 4 ++
> > Documentation/devicetree/bindings/usb/usb-phy.txt | 7 +-
> > arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 13 ----
>
> I'm taking this patch but I'm leaving out the omap_hwmod_44xx_data.c
> change just to kill dependency. Can you send that single change as a
> separate patch which Tony can queue ?

For the USB patches, please also leave out patches touching
arch/arm/mach-omap2/devices.c. Those are almost guaranteed to
cause pointless merge conflicts with other branches.

I suggest you set up few immutable branches:

1. Minimal platform_data changes for all your USB changes

This should contain include/linux/platform_data changes and
changes to arch/arm/*omap* so me and Paul can merge it in too
to avoid merge conflicts.

2. The rest of the driver/usb changes

This can then be based on #1 branch above.

3. Changes for the .dts files for Benoit

These can be queued separately from #1 and #2 above.

Regards,

Tony


\
 
 \ /
  Last update: 2013-02-01 21:01    [W:0.063 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site