lkml.org 
[lkml]   [2013]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] pinctrl: at91: implement at91_pinconf_dbg_show
Date
This allows to get the pin configuration by using debugfs. On my system:
# cat /sys/kernel/debug/pinctrl/pinctrl.3/pinconf-pins

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
drivers/pinctrl/pinctrl-at91.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index b0b78f3468ae..bcfc8a2eebca 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -784,10 +784,35 @@ static int at91_pinconf_set(struct pinctrl_dev *pctldev,
return 0;
}

+#define DBG_SHOW_FLAG(flag) do { \
+ if (config & flag) { \
+ if (num_conf) \
+ seq_puts(s, "|"); \
+ seq_puts(s, #flag); \
+ num_conf++; \
+ } \
+} while (0)
+
static void at91_pinconf_dbg_show(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned pin_id)
{
+ unsigned long config;
+ int ret, val, num_conf = 0;
+
+ ret = at91_pinconf_get(pctldev, pin_id, &config);
+
+ DBG_SHOW_FLAG(MULTI_DRIVE);
+ DBG_SHOW_FLAG(PULL_UP);
+ DBG_SHOW_FLAG(PULL_DOWN);
+ DBG_SHOW_FLAG(DIS_SCHMIT);
+ DBG_SHOW_FLAG(DEGLITCH);
+ DBG_SHOW_FLAG(DEBOUNCE);
+ if (config & DEBOUNCE) {
+ val = config >> DEBOUNCE_VAL_SHIFT;
+ seq_printf(s, "(%d)", val);
+ }

+ return;
}

static void at91_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
--
1.8.3.2


\
 
 \ /
  Last update: 2013-12-07 14:41    [W:0.243 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site