lkml.org 
[lkml]   [2013]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/4] ARM: tegra: add pinmux controller to tegra124.dtsi
On Friday 06 December 2013 04:49 AM, Stephen Warren wrote:
> On 12/05/2013 04:16 PM, Stephen Warren wrote:
>> On 12/05/2013 03:57 AM, Laxman Dewangan wrote:
>>> The tegra124 pinmux controller is identical to tegra114 with
>>> removing some of existing pins from T114 and adding new pins.
>> I already sent this patch.
> Oh, I do notice one difference between the two patches:
>
> Mine:
>
>> + reg = <0x70000868 0x148>, /* Pad control registers */
>> + <0x70003000 0x40c>; /* Mux registers */
> Yours:
>
>> + reg = <0x70000868 0x164 /* Pad control registers */
>> + 0x70003000 0x434>; /* PinMux registers */
> Are the increase register lengths in your patch correct? If so, I guess
> I'll drop my patch and replace it with yours if you fix up the unit address.
Yes, the last entry of the bank 0 and 1 are:
DRV_PINGROUP(ao4, 0x9c8, 2, 3, 4, 12, 7, 20, 7, 28, 2, 30,
2, Y),
and
PINGROUP(dp_hpd_pff0, DP, RSVD2, RSVD3,
RSVD4, DP, 0x3430, N, N, N),



\
 
 \ /
  Last update: 2013-12-06 07:41    [W:0.116 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site