[lkml]   [2013]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 0/3] ARM: OMAP2+: USB Host bug fixes for 3.13 rc

On 12/05/2013 08:48 PM, Tony Lindgren wrote:
> * Tomi Valkeinen <> [131204 02:01]:
>> On 2013-12-03 16:25, Roger Quadros wrote:
>>> Hi,
>>> This is a follow up solution to the original series in [1]
>>> The first patch fixes the OMAP4 Panda USB detection problems on 3.13-rc1
>>> with u-boot v2013.10.
>>> The remaining 2 patches are required if SOFTRESET needs to be done for the
>>> USB Host module on OMAP3 platforms.
>>> Patch 2 fixes the hwmod RESET logic to prevent multiple SOFTRESETs
>>> being issued to the modules. This multiple SOFTRESET was causing problems
>>> with OMAP3 USB Host module. On Beagleboard C4 this is seen as failure to
>>> mount NFS root over external USB to Ethernet device.
>>> This might be the reason why HWMOD_INIT_NO_RESET was used for the OMAP
>>> USB host module in OMAP3 hwmod data and just carried forward in OMAP4
>>> and OMAP5 hwmod data as well.
>>> cheers,
>>> -roger
>> Tested on Panda and Beagle xM. Works fine for me.
> Looks like we should merge these as regression fixes during the -rc
> cycle. Paul should take a look at these first though.

At least the first one must be taken ASAP. The other two would be nice to have though.


 \ /
  Last update: 2013-12-06 10:41    [W:0.089 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site