Messages in this thread | | | Date | Fri, 6 Dec 2013 11:28:14 +0900 | From | Milo Kim <> | Subject | Re: [PATCH v5 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator |
| |
Hello guys,
My apologies for too messy messages. Would you please refer to the patch-set with 'PATCH RESEND v5'? Thanks.
Milo
On 12/06/2013 11:08 AM, Milo Kim wrote: > LP3943 is an integrated device capable of driving 16 output channels. > It can be used for GPIO expander and PWM generators. > LP3493 registers are controlled via the I2C interface. > > This patch-set consists of four parts - MFD, GPIO, PWM and documents. > > Update from v4 to v5: > Add Thierry's ACK for the PWM driver and the DT documentation > > Milo Kim (4): > mfd: add LP3943 MFD driver > gpio: add LP3943 I2C GPIO expander driver > pwm: add LP3943 PWM driver > Documentation: add LP3943 DT bindings and document > > .../devicetree/bindings/gpio/gpio-lp3943.txt | 37 +++ > Documentation/devicetree/bindings/mfd/lp3943.txt | 33 ++ > .../devicetree/bindings/pwm/pwm-lp3943.txt | 58 ++++ > drivers/gpio/Kconfig | 8 + > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-lp3943.c | 242 +++++++++++++++ > drivers/mfd/Kconfig | 11 + > drivers/mfd/Makefile | 1 + > drivers/mfd/lp3943.c | 167 +++++++++++ > drivers/pwm/Kconfig | 10 + > drivers/pwm/Makefile | 1 + > drivers/pwm/pwm-lp3943.c | 314 ++++++++++++++++++++ > include/linux/mfd/lp3943.h | 114 +++++++ > 13 files changed, 997 insertions(+) > create mode 100644 Documentation/devicetree/bindings/gpio/gpio-lp3943.txt > create mode 100644 Documentation/devicetree/bindings/mfd/lp3943.txt > create mode 100644 Documentation/devicetree/bindings/pwm/pwm-lp3943.txt > create mode 100644 drivers/gpio/gpio-lp3943.c > create mode 100644 drivers/mfd/lp3943.c > create mode 100644 drivers/pwm/pwm-lp3943.c > create mode 100644 include/linux/mfd/lp3943.h >
| |