lkml.org 
[lkml]   [2013]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v5 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator
Date
LP3943 is an integrated device capable of driving 16 output channels.
It can be used for GPIO expander and PWM generators.
LP3493 registers are controlled via the I2C interface.

This patch-set consists of four parts - MFD, GPIO, PWM and documents.

Update from v4 to v5:
Add Thierry's ACK for the PWM driver and the DT documentation

Milo Kim (4):
mfd: add LP3943 MFD driver
gpio: add LP3943 I2C GPIO expander driver
pwm: add LP3943 PWM driver
Documentation: add LP3943 DT bindings and document

.../devicetree/bindings/gpio/gpio-lp3943.txt | 37 +++
Documentation/devicetree/bindings/mfd/lp3943.txt | 33 ++
.../devicetree/bindings/pwm/pwm-lp3943.txt | 58 ++++
drivers/gpio/Kconfig | 8 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-lp3943.c | 242 +++++++++++++++
drivers/mfd/Kconfig | 11 +
drivers/mfd/Makefile | 1 +
drivers/mfd/lp3943.c | 167 +++++++++++
drivers/pwm/Kconfig | 10 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-lp3943.c | 314 ++++++++++++++++++++
include/linux/mfd/lp3943.h | 114 +++++++
13 files changed, 997 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-lp3943.txt
create mode 100644 Documentation/devicetree/bindings/mfd/lp3943.txt
create mode 100644 Documentation/devicetree/bindings/pwm/pwm-lp3943.txt
create mode 100644 drivers/gpio/gpio-lp3943.c
create mode 100644 drivers/mfd/lp3943.c
create mode 100644 drivers/pwm/pwm-lp3943.c
create mode 100644 include/linux/mfd/lp3943.h

--
1.7.10.4



\
 
 \ /
  Last update: 2013-12-06 03:41    [W:0.033 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site