lkml.org 
[lkml]   [2013]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH CFT] ARM:MMP: Enable ARM_PATCH_PHYS_VIRT and ZRELADDR default
Date
ARM_PATCH_PHYS_VIRT and AUTO_ZRELADDR has been enabled as default configs
to Marvell PXA168/910/MMP2 platforms.

Introduction of PHYS_VIRT config as default would enable phy-to-virt and
virt-to-phy translation function at boot and module loading time
and enforce dynamic reallocation of memory. AUTO_ZRELADDR config would
enable calculation of kernel load address at run time.

PHYS_VIRT config is mutually exclusive to XIP_KERNEL, XIP_KERNEL is used in
systems with NOR flash devices, and ZRELADDR config is mutually exclusive
to ZBOOT_ROM.

CFT::Call For Testing

Requesting maintainers of Marvell PXA168/910/MMP2 platforms to evaluate the
changes on the board and comment, as I dont have the board for testing and
also requesting an ACK

Signed-off-by: panchaxari <panchaxari.prasannamurthy@linaro.org>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
arch/arm/Kconfig | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 79ba1a8..13621ed 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -560,6 +560,8 @@ config ARCH_MMP
bool "Marvell PXA168/910/MMP2"
depends on MMU
select ARCH_REQUIRE_GPIOLIB
+ select ARM_PATCH_PHYS_VIRT
+ select AUTO_ZRELADDR
select CLKDEV_LOOKUP
select GENERIC_ALLOCATOR
select GENERIC_CLOCKEVENTS
--
1.7.10.4


\
 
 \ /
  Last update: 2013-12-05 07:41    [W:0.025 / U:0.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site