lkml.org 
[lkml]   [2013]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 07/12] efi: passing kexec necessary efi data via setup_data
On Thu, Dec 05, 2013 at 08:56:02AM -0700, Toshi Kani wrote:
> The smbios in efi_setup_data is necessary for kexec to pass the physical
> address of the SMBIOS table from the 1st kernel to the 2nd kernel.
>
> The kernel boot sequence proceeds in the following order. Step 2
> requires efi.smbios to be the physical address. However, Dave found
> that EFI system table has a virtual address of SMBIOS in step 1. Hence,
> he sets it back to the physical address with the smbios in
> efi_setup_data. (When it is still the physical address, it simply sets
> the same value.)
>
> 1. efi_init() - Set efi.smbios from EFI system table
> 2. dmi_scan_machine() - Temporary map efi.smbios to access SMBIOS table
> 3. efi_enter_virtual_mode() - Map EFI ranges

Thanks Toshi, it is all clear now.

@Dave: you might want to put Toshi's explanation in the commit message
of your patch so that we know *why* the change is needed.

Thanks.

--
Regards/Gruss,
Boris.

Sent from a fat crate under my desk. Formatting is fine.
--


\
 
 \ /
  Last update: 2013-12-05 22:01    [W:0.166 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site