lkml.org 
[lkml]   [2013]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] watchdog: s3c2410_wdt: Report when the watchdog reset the system
From
Tomasz,

On Thu, Dec 5, 2013 at 8:21 AM, Tomasz Figa <t.figa@samsung.com> wrote:
> Hi Doug,
>
> Please see my comments inline.
>
> On Monday 02 of December 2013 10:14:41 Doug Anderson wrote:
>> A good watchdog driver is supposed to report when it was responsible
>> for resetting the system. Implement this for the s3c2410, at least on
>> exynos5250 and exynos5420 where we already have a pointer to the PMU
>> registers to read the information.
>>
>> Signed-off-by: Doug Anderson <dianders@chromium.org>
>> ---
>> This patch is based atop Leela Krishna's recent series that ends with
>> (ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420)
>> AKA <https://patchwork.kernel.org/patch/3251861/>.
>>
>> drivers/watchdog/s3c2410_wdt.c | 42 +++++++++++++++++++++++++++++++++++++++---
>> 1 file changed, 39 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
>> index 47f4dcf..2c87d37 100644
>> --- a/drivers/watchdog/s3c2410_wdt.c
>> +++ b/drivers/watchdog/s3c2410_wdt.c
>> @@ -62,9 +62,13 @@
>> #define CONFIG_S3C2410_WATCHDOG_ATBOOT (0)
>> #define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME (15)
>>
>> +#define RST_STAT_REG_OFFSET 0x0404
>
> IMHO this should be namespaced, at least with EXYNOS5 prefix. The two
> registers below should be as well, but I missed this in the patch adding
> them.

Done in v2 (plus fixup of Leela Krishna's).


>> #define WDT_DISABLE_REG_OFFSET 0x0408
>> #define WDT_MASK_RESET_REG_OFFSET 0x040c
>> #define QUIRK_NEEDS_PMU_CONFIG (1 << 0)
>> +#define QUIRK_HAS_RST_STAT (1 << 1)
>> +#define QUIRKS_NEED_PMUREG (QUIRK_NEEDS_PMU_CONFIG | \
>> + QUIRK_HAS_RST_STAT)
>>
>> static bool nowayout = WATCHDOG_NOWAYOUT;
>> static int tmr_margin;
>> @@ -98,6 +102,9 @@ MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)");
>> * timer reset functionality.
>> * @mask_bit: Bit number for the watchdog timer in the disable register and the
>> * mask reset register.
>> + * @rst_stat_reg: Offset in pmureg for the register that has the reset status.
>> + * @rst_stat_bit: Bit number in the rst_stat register indicating a watchdog
>> + * reset.
>> * @quirks: A bitfield of quirks.
>> */
>>
>> @@ -105,6 +112,8 @@ struct s3c2410_wdt_variant {
>> int disable_reg;
>> int mask_reset_reg;
>> int mask_bit;
>> + int rst_stat_reg;
>> + int rst_stat_bit;
>> u32 quirks;
>> };
>>
>> @@ -131,14 +140,20 @@ static const struct s3c2410_wdt_variant drv_data_exynos5250 = {
>> .disable_reg = WDT_DISABLE_REG_OFFSET,
>> .mask_reset_reg = WDT_MASK_RESET_REG_OFFSET,
>> .mask_bit = 20,
>> - .quirks = QUIRK_NEEDS_PMU_CONFIG
>> + .rst_stat_reg = RST_STAT_REG_OFFSET,
>> + .rst_stat_bit = 20,
>> + .quirks = QUIRK_NEEDS_PMU_CONFIG |
>> + QUIRK_HAS_RST_STAT,
>> };
>>
>> static const struct s3c2410_wdt_variant drv_data_exynos5420 = {
>> .disable_reg = WDT_DISABLE_REG_OFFSET,
>> .mask_reset_reg = WDT_MASK_RESET_REG_OFFSET,
>> .mask_bit = 0,
>> - .quirks = QUIRK_NEEDS_PMU_CONFIG
>> + .rst_stat_reg = RST_STAT_REG_OFFSET,
>> + .rst_stat_bit = 9,
>> + .quirks = QUIRK_NEEDS_PMU_CONFIG |
>> + QUIRK_HAS_RST_STAT,
>> };
>>
>> static const struct of_device_id s3c2410_wdt_match[] = {
>> @@ -423,6 +438,25 @@ static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
>> }
>> #endif
>>
>> +static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt)
>> +{
>> + unsigned int bootstatus = 0;
>> + int ret;
>> +
>> + if (wdt->drv_data->quirks & QUIRK_HAS_RST_STAT) {
>
> nit: I guess it's just a matter of taste, but to reduce code indentation
> you could inverse the check and simply return 0 here.

Done in v2. This is the same suggestion Olof made.

-Doug


\
 
 \ /
  Last update: 2013-12-05 20:01    [W:0.188 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site