lkml.org 
[lkml]   [2013]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 2/4] dt: exynos5250: Enable support for generic USB 3.0 phy
Date

Hi,

Does the old phy-samsung-usb3 driver currently work on Exynos5250? If yes,
then this patch should be merged with patch #1 to preserve bisectability.

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

On Wednesday, December 04, 2013 03:39:05 PM Vivek Gautam wrote:
> Update device tree bindings for DWC3 controller and
> USB 3.0 phy present on Exynos 5250 SoC, to start using
> the phy driver based on generic phy framework.
>
> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
> ---
> arch/arm/boot/dts/exynos5250.dtsi | 16 ++++++----------
> 1 files changed, 6 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> index 9db5047..7444717 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -475,22 +475,18 @@
> compatible = "synopsys,dwc3";
> reg = <0x12000000 0x10000>;
> interrupts = <0 72 0>;
> - usb-phy = <&usb2_phy &usb3_phy>;
> + phys = <&usb3_phy>;
> + phy-names = "usb3-phy";
> };
> };
>
> usb3_phy: usbphy@12100000 {
> compatible = "samsung,exynos5250-usb3phy";
> reg = <0x12100000 0x100>;
> - clocks = <&clock 1>, <&clock 286>;
> - clock-names = "ext_xtal", "usbdrd30";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> -
> - usbphy-sys {
> - reg = <0x10040704 0x8>;
> - };
> + clocks = <&clock 286>, <&clock 1>;
> + clock-names = "phy", "usb3phy_refclk";
> + samsung,syscon-phandle = <&pmu_syscon>;
> + #phy-cells = <0>;
> };
>
> usb@12110000 {



\
 
 \ /
  Last update: 2013-12-04 14:41    [W:0.160 / U:3.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site