lkml.org 
[lkml]   [2013]   [Dec]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/3] ARM: tegra: correct Colibri T20 regulator settings
Date
Set the parent of the regulators LDO2 to LDO9 according to the
schematic. Set the base voltage to 3.3V, there is only 3.3V on the
module itself.

Set the Core and CPU voltage to the specified voltages of 1.2V and
1.0V respectivly.

LDO6 should deliver 2.85V. The attached peripherals were not in
use so far.

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
arch/arm/boot/dts/tegra20-colibri-512.dtsi | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
index cbe89ff..51e0880 100644
--- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -225,15 +225,15 @@
#gpio-cells = <2>;
gpio-controller;

- sys-supply = <&vdd_5v0_reg>;
+ sys-supply = <&vdd_3v3_reg>;
vin-sm0-supply = <&sys_reg>;
vin-sm1-supply = <&sys_reg>;
vin-sm2-supply = <&sys_reg>;
vinldo01-supply = <&sm2_reg>;
- vinldo23-supply = <&sm2_reg>;
- vinldo4-supply = <&sm2_reg>;
- vinldo678-supply = <&sm2_reg>;
- vinldo9-supply = <&sm2_reg>;
+ vinldo23-supply = <&vdd_3v3_reg>;
+ vinldo4-supply = <&vdd_3v3_reg>;
+ vinldo678-supply = <&vdd_3v3_reg>;
+ vinldo9-supply = <&vdd_3v3_reg>;

regulators {
#address-cells = <1>;
@@ -250,8 +250,8 @@
reg = <1>;
regulator-compatible = "sm0";
regulator-name = "vdd_sm0,vdd_core";
- regulator-min-microvolt = <1275000>;
- regulator-max-microvolt = <1275000>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
regulator-always-on;
};

@@ -259,8 +259,8 @@
reg = <2>;
regulator-compatible = "sm1";
regulator-name = "vdd_sm1,vdd_cpu";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
regulator-always-on;
};

@@ -316,8 +316,8 @@
reg = <10>;
regulator-compatible = "ldo6";
regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
};

hdmi_vdd_reg: regulator@11 {
@@ -504,12 +504,12 @@
#address-cells = <1>;
#size-cells = <0>;

- vdd_5v0_reg: regulator@100 {
+ vdd_3v3_reg: regulator@100 {
compatible = "regulator-fixed";
reg = <100>;
- regulator-name = "vdd_5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
+ regulator-name = "vdd_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};

--
1.8.4.2


\
 
 \ /
  Last update: 2013-12-03 21:21    [W:0.063 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site