lkml.org 
[lkml]   [2013]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 3.12 038/212] ARM: dts: Add max77686 RTC interrupt to cros5250-common
    Date
    3.12-stable review patch.  If anyone has any objections, please let me know.

    ------------------

    From: Doug Anderson <dianders@chromium.org>

    commit c61248afa8190ae3f47ee67f46e3c9b584a73d31 upstream.

    Without the interrupt you'll get problems if you enable
    CONFIG_RTC_DRV_MAX77686. Setup the interrupt properly in the device
    tree.

    Signed-off-by: Doug Anderson <dianders@chromium.org>
    Tested-by: Marc Zyngier <marc.zyngier@arm.com>
    Signed-off-by: Olof Johansson <olof@lixom.net>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

    ---
    arch/arm/boot/dts/cros5250-common.dtsi | 12 ++++++++++++
    1 file changed, 12 insertions(+)

    --- a/arch/arm/boot/dts/cros5250-common.dtsi
    +++ b/arch/arm/boot/dts/cros5250-common.dtsi
    @@ -27,6 +27,13 @@
    i2c2_bus: i2c2-bus {
    samsung,pin-pud = <0>;
    };
    +
    + max77686_irq: max77686-irq {
    + samsung,pins = "gpx3-2";
    + samsung,pin-function = <0>;
    + samsung,pin-pud = <0>;
    + samsung,pin-drv = <0>;
    + };
    };

    i2c@12C60000 {
    @@ -35,6 +42,11 @@

    max77686@09 {
    compatible = "maxim,max77686";
    + interrupt-parent = <&gpx3>;
    + interrupts = <2 0>;
    + pinctrl-names = "default";
    + pinctrl-0 = <&max77686_irq>;
    + wakeup-source;
    reg = <0x09>;

    voltage-regulators {



    \
     
     \ /
      Last update: 2013-12-02 21:41    [W:4.050 / U:0.064 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site