lkml.org 
[lkml]   [2013]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] spi/atmel: document clock properties
On 17/12/2013 12:01, Boris BREZILLON :
> Document the clock properties required by the spi-atmel driver.
>
> Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

> ---
> .../devicetree/bindings/spi/spi_atmel.txt | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/spi/spi_atmel.txt b/Documentation/devicetree/bindings/spi/spi_atmel.txt
> index 07e04cd..4f8184d 100644
> --- a/Documentation/devicetree/bindings/spi/spi_atmel.txt
> +++ b/Documentation/devicetree/bindings/spi/spi_atmel.txt
> @@ -5,6 +5,9 @@ Required properties:
> - reg: Address and length of the register set for the device
> - interrupts: Should contain spi interrupt
> - cs-gpios: chipselects
> +- clock-names: tuple listing input clock names.
> + Required elements: "spi_clk"
> +- clocks: phandles to input clocks.
>
> Example:
>
> @@ -14,6 +17,8 @@ spi1: spi@fffcc000 {
> interrupts = <13 4 5>;
> #address-cells = <1>;
> #size-cells = <0>;
> + clocks = <&spi1_clk>;
> + clock-names = "spi_clk";
> cs-gpios = <&pioB 3 0>;
> status = "okay";
>
>


--
Nicolas Ferre


\
 
 \ /
  Last update: 2013-12-19 17:21    [W:0.780 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site