lkml.org 
[lkml]   [2013]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH V10 04/14] xen/pvh: bootup and setup (E820) related changes.
On Fri, Dec 13, 2013 at 12:55:26PM -0500, Boris Ostrovsky wrote:
> On 12/12/2013 09:10 PM, Konrad Rzeszutek Wilk wrote:
> >From: Mukesh Rathor <mukesh.rathor@oracle.com>
> >
> >In the bootup code for PVH we can trap cpuid via vmexit, so don't
> >need to use emulated prefix call. We also check for vector callback
> >early on, as it is a required feature. PVH also runs at default kernel
> >IOPL.
> >
> >In setup.c which deals with E820, in xen_add_extra_mem() we can skip
> >updating P2M as it's managed by Xen. PVH maps the entire IO space,
> >but only RAM pages need to be repopulated.
> >
> >Finally, pure PV settings are moved to a separate function that are
> >only called for pure PV, ie, pv with pvmmu.
> >
> >Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
> >Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> >[ ijc -- rebase onto xen PVonHVM: use E820_Reserved area for
> > shared_info ]
> >[v2: Rebase on v3.9-rc1 with MMIO/Kexec reverted]
> >
> >Conflicts:
> > arch/x86/xen/setup.c
> >[due to "xen: Support 64-bit PV guest receiving NMIs"]
> >---
> > arch/x86/xen/enlighten.c | 77 ++++++++++++++++++++++++++++++++++-----------
> > arch/x86/xen/setup.c | 63 ++++++++++++++++++++++++++++++-------
> > 2 files changed, 109 insertions(+), 31 deletions(-)
> >
> >diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
> >index fa6ade7..500508d 100644
> >--- a/arch/x86/xen/enlighten.c
> >+++ b/arch/x86/xen/enlighten.c
> >@@ -46,6 +46,7 @@
> > #include <xen/hvm.h>
> > #include <xen/hvc-console.h>
> > #include <xen/acpi.h>
> >+#include <xen/features.h>
> > #include <asm/paravirt.h>
> > #include <asm/apic.h>
> >@@ -129,6 +130,9 @@ RESERVE_BRK(shared_info_page_brk, PAGE_SIZE);
> > __read_mostly int xen_have_vector_callback;
> > EXPORT_SYMBOL_GPL(xen_have_vector_callback);
> >+#define xen_pvh_domain() (xen_pv_domain() && \
> >+ xen_feature(XENFEAT_auto_translated_physmap) && \
> >+ xen_have_vector_callback)
>
> Can this be used in earlier patches instead of checking for
> XENFEAT_auto_translated_physmap, when it's clear that we actually
> mean PVH?

As I posted the patches I realized we could actually just remove this
check and piggyback on xen_feature(XENFEAT_auto_translated_physmap).

But then I wasn't sure as I think you can do pure PV with auto-translate
on (so it uses shadow paging). But I think that code is bitrotten.

>
> > /*
> > * Point at some empty memory to start with. We map the real shared_info
> > * page as soon as fixmap is up and running.
> >@@ -262,8 +266,9 @@ static void __init xen_banner(void)
> > struct xen_extraversion extra;
> > HYPERVISOR_xen_version(XENVER_extraversion, &extra);
> >- printk(KERN_INFO "Booting paravirtualized kernel on %s\n",
> >- pv_info.name);
> >+ pr_info("Booting paravirtualized kernel %son %s\n",
> >+ xen_feature(XENFEAT_auto_translated_physmap) ?
>
> ... and here as well (and possibly elsewhere).
>
> >+ "with PVH extensions " : "", pv_info.name);
> > printk(KERN_INFO "Xen version: %d.%d%s%s\n",
> > version >> 16, version & 0xffff, extra.extraversion,
> > xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
> >@@ -331,12 +336,15 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx,
> > break;
> > }
> >- asm(XEN_EMULATE_PREFIX "cpuid"
> >- : "=a" (*ax),
> >- "=b" (*bx),
> >- "=c" (*cx),
> >- "=d" (*dx)
> >- : "0" (*ax), "2" (*cx));
> >+ if (xen_pvh_domain())
> >+ native_cpuid(ax, bx, cx, dx);
> >+ else
> >+ asm(XEN_EMULATE_PREFIX "cpuid"
> >+ : "=a" (*ax),
> >+ "=b" (*bx),
> >+ "=c" (*cx),
> >+ "=d" (*dx)
> >+ : "0" (*ax), "2" (*cx));
> > *bx &= maskebx;
> > *cx &= maskecx;
> >@@ -1125,6 +1133,10 @@ void xen_setup_shared_info(void)
> > HYPERVISOR_shared_info =
> > (struct shared_info *)__va(xen_start_info->shared_info);
> >+ /* PVH TBD/FIXME: vcpu info placement in phase 2 */
> >+ if (xen_pvh_domain())
> >+ return;
> >+
> > #ifndef CONFIG_SMP
> > /* In UP this is as good a place as any to set up shared info */
> > xen_setup_vcpu_info_placement();
> >@@ -1410,6 +1422,11 @@ static void __init xen_boot_params_init_edd(void)
> > */
> > static void __init xen_setup_stackprotector(void)
> > {
> >+ /* PVH TBD/FIXME: investigate setup_stack_canary_segment */
>
> setup_stack_canary_segment() is for 32-bit only and since PVH (which
> I assume is what this 'if' is about) is a 64-bit only binary this
> call is a nop.

<nods>
>
> >+ if (xen_feature(XENFEAT_auto_translated_physmap)) {
> >+ switch_to_new_gdt(0);
> >+ return;
> >+ }
> > pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry_boot;
> > pv_cpu_ops.load_gdt = xen_load_gdt_boot;
> >@@ -1420,6 +1437,19 @@ static void __init xen_setup_stackprotector(void)
> > pv_cpu_ops.load_gdt = xen_load_gdt;
> > }
> >+static void __init xen_pvh_early_guest_init(void)
> >+{
> >+ if (xen_feature(XENFEAT_hvm_callback_vector))
> >+ xen_have_vector_callback = 1;
> >+
> >+#ifdef CONFIG_X86_32
> >+ if (xen_feature(XENFEAT_auto_translated_physmap)) {
> >+ xen_raw_printk("ERROR: 32bit PVH guests are not supported\n");
> >+ BUG();
> >+ }
> >+#endif
> >+}
> >+
> > /* First C function to be called on Xen boot */
> > asmlinkage void __init xen_start_kernel(void)
> > {
> >@@ -1431,13 +1461,18 @@ asmlinkage void __init xen_start_kernel(void)
> > xen_domain_type = XEN_PV_DOMAIN;
> >+ xen_setup_features();
> >+ xen_pvh_early_guest_init();
> > xen_setup_machphys_mapping();
> > /* Install Xen paravirt ops */
> > pv_info = xen_info;
> > pv_init_ops = xen_init_ops;
> >- pv_cpu_ops = xen_cpu_ops;
> > pv_apic_ops = xen_apic_ops;
> >+ if (xen_pvh_domain())
> >+ pv_cpu_ops.cpuid = xen_cpuid;
> >+ else
> >+ pv_cpu_ops = xen_cpu_ops;
> > x86_init.resources.memory_setup = xen_memory_setup;
> > x86_init.oem.arch_setup = xen_arch_setup;
> >@@ -1469,8 +1504,6 @@ asmlinkage void __init xen_start_kernel(void)
> > /* Work out if we support NX */
> > x86_configure_nx();
> >- xen_setup_features();
> >-
> > /* Get mfn list */
> > if (!xen_feature(XENFEAT_auto_translated_physmap))
> > xen_build_dynamic_phys_to_machine();
> >@@ -1548,14 +1581,18 @@ asmlinkage void __init xen_start_kernel(void)
> > /* set the limit of our address space */
> > xen_reserve_top();
> >- /* We used to do this in xen_arch_setup, but that is too late on AMD
> >- * were early_cpu_init (run before ->arch_setup()) calls early_amd_init
> >- * which pokes 0xcf8 port.
> >- */
> >- set_iopl.iopl = 1;
> >- rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
> >- if (rc != 0)
> >- xen_raw_printk("physdev_op failed %d\n", rc);
> >+ /* PVH: runs at default kernel iopl of 0 */
> >+ if (!xen_pvh_domain()) {
> >+ /*
> >+ * We used to do this in xen_arch_setup, but that is too late
> >+ * on AMD were early_cpu_init (run before ->arch_setup()) calls
> >+ * early_amd_init which pokes 0xcf8 port.
> >+ */
> >+ set_iopl.iopl = 1;
> >+ rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
> >+ if (rc != 0)
> >+ xen_raw_printk("physdev_op failed %d\n", rc);
> >+ }
> > #ifdef CONFIG_X86_32
> > /* set up basic CPUID stuff */
> >@@ -1625,6 +1662,8 @@ asmlinkage void __init xen_start_kernel(void)
> > }
> > void __ref xen_hvm_init_shared_info(void)
> >+/* Use a pfn in RAM, may move to MMIO before kexec.
> >+ * This function also called for PVH dom0 */
> > {
> > int cpu;
> > struct xen_add_to_physmap xatp;
> >diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
> >index 68c054f..e3dcd8c 100644
> >--- a/arch/x86/xen/setup.c
> >+++ b/arch/x86/xen/setup.c
> >@@ -27,6 +27,7 @@
> > #include <xen/interface/memory.h>
> > #include <xen/interface/physdev.h>
> > #include <xen/features.h>
> >+#include "mmu.h"
> > #include "xen-ops.h"
> > #include "vdso.h"
> >@@ -81,6 +82,9 @@ static void __init xen_add_extra_mem(u64 start, u64 size)
> > memblock_reserve(start, size);
> >+ if (xen_feature(XENFEAT_auto_translated_physmap))
> >+ return;
> >+
> > xen_max_p2m_pfn = PFN_DOWN(start + size);
> > for (pfn = PFN_DOWN(start); pfn < xen_max_p2m_pfn; pfn++) {
> > unsigned long mfn = pfn_to_mfn(pfn);
> >@@ -103,6 +107,7 @@ static unsigned long __init xen_do_chunk(unsigned long start,
> > .domid = DOMID_SELF
> > };
> > unsigned long len = 0;
> >+ int xlated_phys = xen_feature(XENFEAT_auto_translated_physmap);
>
> This is inconsistent with other uses of
> xen_feature(XENFEAT_auto_translated_physmap), so far xen_feature()
> has always been used.

.. I think sprinkling those 'xen_pvh_domain' in arch/x86 is OK, but not
in the drivers/xen (as those are also used by ARM).

But perhaps we should just use 'if (xen_feature(XENFEAT..)'. Hmm.
>
> > unsigned long pfn;
> > int ret;
> >@@ -116,7 +121,7 @@ static unsigned long __init xen_do_chunk(unsigned long start,
> > continue;
> > frame = mfn;
> > } else {
> >- if (mfn != INVALID_P2M_ENTRY)
> >+ if (!xlated_phys && mfn != INVALID_P2M_ENTRY)
> > continue;
> > frame = pfn;
> > }
> >@@ -239,6 +244,27 @@ static void __init xen_set_identity_and_release_chunk(
> > *identity += set_phys_range_identity(start_pfn, end_pfn);
> > }
> >+/* For PVH, the pfns [0..MAX] are mapped to mfn's in the EPT/NPT. The mfns
> >+ * are released as part of this 1:1 mapping hypercall back to the dom heap.
> >+ * Also, we map the entire IO space, ie, beyond max_pfn_mapped.
> >+ */
> >+static void __init xen_pvh_identity_map_chunk(unsigned long start_pfn,
> >+ unsigned long end_pfn, unsigned long *released,
> >+ unsigned long *identity, unsigned long max_pfn)
> >+{
> >+ unsigned long pfn;
> >+ int numpfns = 1, add_mapping = 1;
>
> No need for these two variables;

Code gone.
>
> >+
> >+ for (pfn = start_pfn; pfn < end_pfn; pfn++)
> >+ xen_set_clr_mmio_pvh_pte(pfn, pfn, numpfns, add_mapping);
> >+
> >+ if (start_pfn <= max_pfn) {
> >+ unsigned long end = min(max_pfn_mapped, end_pfn);
> >+ *released += end - start_pfn;
> >+ }
> >+ *identity += end_pfn - start_pfn;
> >+}
> >+
> > static unsigned long __init xen_set_identity_and_release(
> > const struct e820entry *list, size_t map_size, unsigned long nr_pages)
> > {
> >@@ -247,6 +273,7 @@ static unsigned long __init xen_set_identity_and_release(
> > unsigned long identity = 0;
> > const struct e820entry *entry;
> > int i;
> >+ int xlated_phys = xen_feature(XENFEAT_auto_translated_physmap);
>
> Again xlated_phys.

Ripped out.
>
>
> -boris
>
> > /*
> > * Combine non-RAM regions and gaps until a RAM region (or the
> >@@ -268,11 +295,17 @@ static unsigned long __init xen_set_identity_and_release(
> > if (entry->type == E820_RAM)
> > end_pfn = PFN_UP(entry->addr);
> >- if (start_pfn < end_pfn)
> >- xen_set_identity_and_release_chunk(
> >- start_pfn, end_pfn, nr_pages,
> >- &released, &identity);
> >-
> >+ if (start_pfn < end_pfn) {
> >+ if (xlated_phys) {
> >+ xen_pvh_identity_map_chunk(start_pfn,
> >+ end_pfn, &released, &identity,
> >+ nr_pages);
> >+ } else {
> >+ xen_set_identity_and_release_chunk(
> >+ start_pfn, end_pfn, nr_pages,
> >+ &released, &identity);
> >+ }
> >+ }
> > start = end;
> > }
> > }
> >@@ -563,16 +596,13 @@ void xen_enable_nmi(void)
> > BUG();
> > #endif
> > }
> >-void __init xen_arch_setup(void)
> >+void __init xen_pvmmu_arch_setup(void)
> > {
> >- xen_panic_handler_init();
> >-
> > HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments);
> > HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_writable_pagetables);
> >- if (!xen_feature(XENFEAT_auto_translated_physmap))
> >- HYPERVISOR_vm_assist(VMASST_CMD_enable,
> >- VMASST_TYPE_pae_extended_cr3);
> >+ HYPERVISOR_vm_assist(VMASST_CMD_enable,
> >+ VMASST_TYPE_pae_extended_cr3);
> > if (register_callback(CALLBACKTYPE_event, xen_hypervisor_callback) ||
> > register_callback(CALLBACKTYPE_failsafe, xen_failsafe_callback))
> >@@ -581,6 +611,15 @@ void __init xen_arch_setup(void)
> > xen_enable_sysenter();
> > xen_enable_syscall();
> > xen_enable_nmi();
> >+}
> >+
> >+/* This function not called for HVM domain */
> >+void __init xen_arch_setup(void)
> >+{
> >+ xen_panic_handler_init();
> >+
> >+ if (!xen_feature(XENFEAT_auto_translated_physmap))
> >+ xen_pvmmu_arch_setup();
> > #ifdef CONFIG_ACPI
> > if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
> > printk(KERN_INFO "ACPI in unprivileged domain disabled\n");
>


\
 
 \ /
  Last update: 2013-12-17 23:01    [W:0.148 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site