lkml.org 
[lkml]   [2013]   [Dec]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 6/7] Input: pmic8xxx-keypad - Migrate to devm_* APIs
On Tue, Dec 10, 2013 at 03:43:15PM -0800, Stephen Boyd wrote:
> Simplify the error paths and reduce the lines of code in this
> driver by using the devm_* APIs.
>
> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
> ---
> drivers/input/keyboard/pmic8xxx-keypad.c | 62 +++++++++-----------------------
> 1 file changed, 17 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/input/keyboard/pmic8xxx-keypad.c b/drivers/input/keyboard/pmic8xxx-keypad.c
> index 2c9f19a..4e6bfbf 100644
> --- a/drivers/input/keyboard/pmic8xxx-keypad.c
> +++ b/drivers/input/keyboard/pmic8xxx-keypad.c
> @@ -586,7 +586,7 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
> return -EINVAL;
> }
>
> - kp = kzalloc(sizeof(*kp), GFP_KERNEL);
> + kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
> if (!kp)
> return -ENOMEM;
>
> @@ -595,32 +595,27 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
> kp->pdata = pdata;
> kp->dev = &pdev->dev;
>
> - kp->input = input_allocate_device();
> + kp->input = devm_input_allocate_device(&pdev->dev);
> if (!kp->input) {
> dev_err(&pdev->dev, "unable to allocate input device\n");
> - rc = -ENOMEM;
> - goto err_alloc_device;
> + return -ENOMEM;
> }
>
> kp->key_sense_irq = platform_get_irq(pdev, 0);
> if (kp->key_sense_irq < 0) {
> dev_err(&pdev->dev, "unable to get keypad sense irq\n");
> - rc = -ENXIO;
> - goto err_get_irq;
> + return kp->key_sense_irq;
> }
>
> kp->key_stuck_irq = platform_get_irq(pdev, 1);
> if (kp->key_stuck_irq < 0) {
> dev_err(&pdev->dev, "unable to get keypad stuck irq\n");
> - rc = -ENXIO;
> - goto err_get_irq;
> + return kp->key_stuck_irq;
> }
>
> kp->input->name = pdata->input_name ? : "PMIC8XXX keypad";
> kp->input->phys = pdata->input_phys_device ? : "pmic8xxx_keypad/input0";
>
> - kp->input->dev.parent = &pdev->dev;
> -
> kp->input->id.bustype = BUS_I2C;
> kp->input->id.version = 0x0001;
> kp->input->id.product = 0x0001;
> @@ -634,7 +629,7 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
> kp->keycodes, kp->input);
> if (rc) {
> dev_err(&pdev->dev, "failed to build keymap\n");
> - goto err_get_irq;
> + return rc;
> }
>
> if (pdata->rep)
> @@ -650,7 +645,7 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
> rc = pmic8xxx_kpd_init(kp);
> if (rc < 0) {
> dev_err(&pdev->dev, "unable to initialize keypad controller\n");
> - goto err_get_irq;
> + return rc;
> }
>
> rc = pmic8xxx_kp_config_gpio(pdata->cols_gpio_start,
> @@ -667,24 +662,26 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
> goto err_gpio_config;
> }
>
> - rc = request_any_context_irq(kp->key_sense_irq, pmic8xxx_kp_irq,
> - IRQF_TRIGGER_RISING, "pmic-keypad", kp);
> + rc = devm_request_any_context_irq(&pdev->dev, kp->key_sense_irq,
> + pmic8xxx_kp_irq, IRQF_TRIGGER_RISING, "pmic-keypad",
> + kp);
> if (rc < 0) {
> dev_err(&pdev->dev, "failed to request keypad sense irq\n");
> - goto err_get_irq;
> + return rc;
> }
>
> - rc = request_any_context_irq(kp->key_stuck_irq, pmic8xxx_kp_stuck_irq,
> - IRQF_TRIGGER_RISING, "pmic-keypad-stuck", kp);
> + rc = devm_request_any_context_irq(&pdev->dev, kp->key_stuck_irq,
> + pmic8xxx_kp_stuck_irq, IRQF_TRIGGER_RISING,
> + "pmic-keypad-stuck", kp);
> if (rc < 0) {
> dev_err(&pdev->dev, "failed to request keypad stuck irq\n");
> - goto err_req_stuck_irq;
> + return rc;
> }
>
> rc = pmic8xxx_kp_read_u8(kp, &ctrl_val, KEYP_CTRL);
> if (rc < 0) {
> dev_err(&pdev->dev, "failed to read KEYP_CTRL register\n");
> - goto err_pmic_reg_read;
> + return rc;
> }
>
> kp->ctrl_reg = ctrl_val;
> @@ -692,36 +689,12 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
> rc = input_register_device(kp->input);
> if (rc < 0) {
> dev_err(&pdev->dev, "unable to register keypad input device\n");
> - goto err_pmic_reg_read;
> + return rc;
> }
>
> device_init_wakeup(&pdev->dev, pdata->wakeup);
>
> return 0;
> -
> -err_pmic_reg_read:
> - free_irq(kp->key_stuck_irq, kp);
> -err_req_stuck_irq:
> - free_irq(kp->key_sense_irq, kp);
> -err_gpio_config:
> -err_get_irq:
> - input_free_device(kp->input);
> -err_alloc_device:
> - kfree(kp);
> - return rc;
> -}
> -
> -static int pmic8xxx_kp_remove(struct platform_device *pdev)
> -{
> - struct pmic8xxx_kp *kp = platform_get_drvdata(pdev);
> -
> - device_init_wakeup(&pdev->dev, 0);

Why are we removing restoring wakeup capable state?

> - free_irq(kp->key_stuck_irq, kp);
> - free_irq(kp->key_sense_irq, kp);
> - input_unregister_device(kp->input);
> - kfree(kp);
> -
> - return 0;
> }
>
> #ifdef CONFIG_PM_SLEEP
> @@ -771,7 +744,6 @@ static SIMPLE_DEV_PM_OPS(pm8xxx_kp_pm_ops,
>
> static struct platform_driver pmic8xxx_kp_driver = {
> .probe = pmic8xxx_kp_probe,
> - .remove = pmic8xxx_kp_remove,
> .driver = {
> .name = PM8XXX_KEYPAD_DEV_NAME,
> .owner = THIS_MODULE,
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> hosted by The Linux Foundation
>

--
Dmitry


\
 
 \ /
  Last update: 2013-12-17 03:41    [W:0.121 / U:4.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site