lkml.org 
[lkml]   [2013]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/3] clk: bcm281xx: add initial clock framework support
On 12/15/2013 06:22 PM, Alex Elder wrote:
> I think I can prepare a series that puts my changes
> before Tim's. Unless I have trouble doing that
> I will send that out in a few hours.
. . .


I got started on doing this but then I decided to go
check on the status of Tim's series. It looks like
Christian is on the verge of taking his series in,
and is planning to coordinate with the affected
maintainers to do so.

I'm going to assume that is going to happen quite
soon--I hope in the next day or two. So rather than
muddy the waters even further, it might be best to
just wait for Tim's series to be accepted and then
you take mine in on top of that.

In any case this is a small mess that's going to
require some coordination to get resolved. Let
me know if there's something else specific you
would recommend.

In the mean time, I have created a new branch that
is based on v3.13-rc4 (and includes Tim's prerequisite
patches). Pull request (still wrapped my my mailer)
is below.

Thanks.

-Alex

The following changes since commit 319e2e3f63c348a9b66db4667efa73178e18b17d:

Linux 3.13-rc4 (2013-12-15 12:31:33 -0800)

are available in the git repository at:

ssh://git@git.linaro.org/people/alex.elder/linux.git
review/bcm-kona-clocks-v4

for you to fetch changes up to deebd4ea75c159697d1e43416683d6068821b431:

ARM: dts: bcm281xx: define real clocks (2013-12-15 22:23:13 -0600)

----------------------------------------------------------------
Alex Elder (3):
clk: bcm281xx: define kona clock binding
clk: bcm281xx: add initial clock framework support
ARM: dts: bcm281xx: define real clocks

Tim Kryger (8):
ARM: dts: Declare clocks as fixed on bcm11351
ARM: dts: Specify clocks for UARTs on bcm11351
Documentation: dt: kona-sdhci: Add clocks property
ARM: dts: Specify clocks for SDHCIs on bcm11351
mmc: sdhci-bcm-kona: Add basic use of clocks
Documentation: dt: kona-timer: Add clocks property
clocksource: kona: Add basic use of external clock
ARM: dts: Specify clocks for timer on bcm11351

.../devicetree/bindings/arm/bcm/kona-timer.txt | 7 +-
.../devicetree/bindings/clock/bcm-kona-clock.txt | 93 ++
.../devicetree/bindings/mmc/kona-sdhci.txt | 4 +
arch/arm/boot/dts/bcm11351.dtsi | 199 +++-
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/bcm/Kconfig | 8 +
drivers/clk/bcm/Makefile | 3 +
drivers/clk/bcm/clk-bcm281xx.c | 416 ++++++++
drivers/clk/bcm/clk-kona-setup.c | 769 +++++++++++++++
drivers/clk/bcm/clk-kona.c | 1033
++++++++++++++++++++
drivers/clk/bcm/clk-kona.h | 414 ++++++++
drivers/clocksource/bcm_kona_timer.c | 14 +-
drivers/mmc/host/sdhci-bcm-kona.c | 37 +-
include/dt-bindings/clock/bcm281xx.h | 65 ++
15 files changed, 3053 insertions(+), 11 deletions(-)
create mode 100644
Documentation/devicetree/bindings/clock/bcm-kona-clock.txt
create mode 100644 drivers/clk/bcm/Kconfig
create mode 100644 drivers/clk/bcm/Makefile
create mode 100644 drivers/clk/bcm/clk-bcm281xx.c
create mode 100644 drivers/clk/bcm/clk-kona-setup.c
create mode 100644 drivers/clk/bcm/clk-kona.c
create mode 100644 drivers/clk/bcm/clk-kona.h
create mode 100644 include/dt-bindings/clock/bcm281xx.h



\
 
 \ /
  Last update: 2013-12-16 06:01    [W:0.080 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site