lkml.org 
[lkml]   [2013]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] usb: chipidea: add support for USB OTG controller on LSI Zevio SoCs
On Sun, Dec 15, 2013 at 02:35:07PM +1100, dt.tangr@gmail.com wrote:
> From: Daniel Tang <dt.tangr@gmail.com>
>
> The USB controller in TI-NSPIRE calculators (LSI Zevio SoC) are based off either
> Freescale's USB OTG controller or the USB controller found in the IMX233, both
> of which are Chipidea compatible.
>
> This patch adds a device tree binding for the controller.
>
> Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
> ---
> drivers/usb/chipidea/Makefile | 1 +
> drivers/usb/chipidea/ci_hdrc_zevio.c | 72 ++++++++++++++++++++++++++++++++++
> 2 files changed, 73 insertions(+)
> create mode 100644 drivers/usb/chipidea/ci_hdrc_zevio.c
>
> diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
> index a99d980..7635407 100644
> --- a/drivers/usb/chipidea/Makefile
> +++ b/drivers/usb/chipidea/Makefile
> @@ -10,6 +10,7 @@ ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG) += debug.o
> # Glue/Bridge layers go here
>
> obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_msm.o
> +obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_zevio.o
>
> # PCI doesn't provide stubs, need to check
> ifneq ($(CONFIG_PCI),)
> diff --git a/drivers/usb/chipidea/ci_hdrc_zevio.c b/drivers/usb/chipidea/ci_hdrc_zevio.c
> new file mode 100644
> index 0000000..3bf6489
> --- /dev/null
> +++ b/drivers/usb/chipidea/ci_hdrc_zevio.c
> @@ -0,0 +1,72 @@
> +/*
> + * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2, as
> + * published by the Free Software Foundation.
> + *
> + * Based off drivers/usb/chipidea/ci_hdrc_msm.c
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/usb/gadget.h>
> +#include <linux/usb/chipidea.h>
> +
> +#include "ci.h"
> +
> +static struct ci_hdrc_platform_data ci_hdrc_zevio_platdata = {
> + .name = "ci_hdrc_zevio",
> + .flags = CI_HDRC_REGS_SHARED,
> + .capoffset = DEF_CAPOFFSET,
> +};
> +
> +static int ci_hdrc_zevio_probe(struct platform_device *pdev)
> +{
> + struct platform_device *ci_pdev;
> +
> + dev_dbg(&pdev->dev, "ci_hdrc_zevio_probe\n");
> +
> + ci_pdev = ci_hdrc_add_device(&pdev->dev,
> + pdev->resource, pdev->num_resources,
> + &ci_hdrc_zevio_platdata);
> +
> + if (IS_ERR(ci_pdev)) {
> + dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n");
> + return PTR_ERR(ci_pdev);
> + }
> +
> + platform_set_drvdata(pdev, ci_pdev);
> +
> + return 0;
> +}
> +
> +static int ci_hdrc_zevio_remove(struct platform_device *pdev)
> +{
> + struct platform_device *ci_pdev = platform_get_drvdata(pdev);
> +
> + ci_hdrc_remove_device(ci_pdev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id ci_hdrc_zevio_dt_ids[] = {
> + { .compatible = "lsi,zevio-usb", },
> + { /* sentinel */ }
> +};
> +
> +static struct platform_driver ci_hdrc_zevio_driver = {
> + .probe = ci_hdrc_zevio_probe,
> + .remove = ci_hdrc_zevio_remove,
> + .driver = {
> + .name = "zevio_usb",
> + .owner = THIS_MODULE,
> + .of_match_table = ci_hdrc_zevio_dt_ids,
> + },
> +};
> +
> +MODULE_DEVICE_TABLE(of, ci_hdrc_zevio_dt_ids);
> +module_platform_driver(ci_hdrc_zevio_driver);
> +
> +MODULE_LICENSE("GPL v2");
> --

The driver patch is okay for me, please cc me your dt patch next
time, I will apply it when your dt patches are applied by
dt maintainer (or any of your dt strings "zevio_xxx" are applied).

--

Best Regards,
Peter Chen



\
 
 \ /
  Last update: 2013-12-16 03:41    [W:0.057 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site