lkml.org 
[lkml]   [2013]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 07/16] rtc: support DS1302 RTC on ICP DAS LP-8x4x
Date
Signed-off-by: Sergei Ianovich <ynvich@gmail.com>
---
v0..v2
* use device tree
* use devm helpers where possible

.../devicetree/bindings/rtc/rtc-ds1302.txt | 14 +++
arch/arm/boot/dts/pxa27x-lp8x4x.dts | 6 ++
arch/arm/configs/lp8x4x_defconfig | 1 +
drivers/rtc/Kconfig | 2 +-
drivers/rtc/rtc-ds1302.c | 111 ++++++++++++++++++++-
5 files changed, 131 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/rtc-ds1302.txt

diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1302.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1302.txt
new file mode 100644
index 0000000..876297c
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-ds1302.txt
@@ -0,0 +1,14 @@
+* Dallas Semiconductor DS-1302 RTC
+
+Simple device which could be used to store date/time between reboots.
+
+Required properties:
+- compatible : Should be "ds,rtc-ds1302"
+- reg : Should be address and size of IO memory region
+
+Examples:
+
+rtc@40900000 {
+ compatible = "ds,rtc-ds1302";
+ reg = <0x1700901c 0x1>;
+};
diff --git a/arch/arm/boot/dts/pxa27x-lp8x4x.dts b/arch/arm/boot/dts/pxa27x-lp8x4x.dts
index a2a9183..574e853 100644
--- a/arch/arm/boot/dts/pxa27x-lp8x4x.dts
+++ b/arch/arm/boot/dts/pxa27x-lp8x4x.dts
@@ -107,5 +107,11 @@
interrupts = <82 IRQ_TYPE_EDGE_RISING>;
status = "okay";
};
+
+ rtc@1700901c {
+ compatible = "ds,rtc-ds1302";
+ reg = <0x1700901c 0x1>;
+ status = "okay";
+ };
};
};
diff --git a/arch/arm/configs/lp8x4x_defconfig b/arch/arm/configs/lp8x4x_defconfig
index 4421c03..57f2830 100644
--- a/arch/arm/configs/lp8x4x_defconfig
+++ b/arch/arm/configs/lp8x4x_defconfig
@@ -133,6 +133,7 @@ CONFIG_USB_SERIAL=m
CONFIG_MMC=y
CONFIG_MMC_PXA=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1302=y
CONFIG_RTC_DRV_PXA=m
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=m
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 0077302..501055f 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -676,7 +676,7 @@ config RTC_DRV_DS1286

config RTC_DRV_DS1302
tristate "Dallas DS1302"
- depends on SH_SECUREEDGE5410
+ depends on SH_SECUREEDGE5410 || (ARCH_PXA && HIGH_RES_TIMERS)
help
If you say yes here you get support for the Dallas DS1302 RTC chips.

diff --git a/drivers/rtc/rtc-ds1302.c b/drivers/rtc/rtc-ds1302.c
index 07e8d79..d88749c 100644
--- a/drivers/rtc/rtc-ds1302.c
+++ b/drivers/rtc/rtc-ds1302.c
@@ -50,7 +50,7 @@
#define ds1302_set_tx()
#define ds1302_set_rx()

-static inline int ds1302_hw_init(void)
+static inline int ds1302_hw_init(struct platform_device *pdev)
{
return 0;
}
@@ -86,6 +86,112 @@ static inline int ds1302_rxbit(void)
return !!(get_dp() & RTC_IODATA);
}

+#elif defined(CONFIG_ARCH_PXA) && defined(CONFIG_HIGH_RES_TIMERS)
+
+#include <linux/hrtimer.h>
+#include <linux/of.h>
+#include <linux/sched.h>
+
+#define RTC_CE 0x01
+#define RTC_CLK 0x02
+#define RTC_nWE 0x04
+#define RTC_IODATA 0x08
+
+static unsigned long ds1302_state;
+
+static void *mem;
+
+void nsleep(unsigned long nanosec)
+{
+ ktime_t t = ns_to_ktime(nanosec);
+ long state = current->state;
+
+ __set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_hrtimeout(&t, HRTIMER_MODE_REL);
+ __set_current_state(state);
+}
+
+static inline int ds1302_hw_init(struct platform_device *pdev)
+{
+ struct resource *r;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -ENODEV;
+
+ mem = devm_ioremap_resource(&pdev->dev, r);
+ if (!mem)
+ return -EFAULT;
+
+ return 0;
+}
+
+static inline void ds1302_reset(void)
+{
+ ds1302_state = 0;
+ iowrite8(ds1302_state, mem);
+ nsleep(4000);
+}
+
+static inline void ds1302_clock(void)
+{
+ nsleep(1000);
+ ds1302_state |= RTC_CLK;
+ iowrite8(ds1302_state, mem);
+ nsleep(1000);
+ ds1302_state &= ~RTC_CLK;
+ iowrite8(ds1302_state, mem);
+}
+
+static inline void ds1302_start(void)
+{
+ ds1302_state &= ~RTC_CLK;
+ ds1302_state |= RTC_CE;
+ iowrite8(ds1302_state, mem);
+ nsleep(3000);
+}
+
+static inline void ds1302_stop(void)
+{
+ ds1302_state &= ~RTC_CE;
+ iowrite8(ds1302_state, mem);
+}
+
+static inline void ds1302_set_tx(void)
+{
+ ds1302_state &= ~RTC_nWE;
+ iowrite8(ds1302_state, mem);
+}
+
+static inline void ds1302_set_rx(void)
+{
+ ds1302_state |= RTC_nWE;
+ iowrite8(ds1302_state, mem);
+}
+
+static inline void ds1302_txbit(int bit)
+{
+ if (bit)
+ ds1302_state |= RTC_IODATA;
+ else
+ ds1302_state &= ~RTC_IODATA;
+ iowrite8(ds1302_state, mem);
+}
+
+static inline int ds1302_rxbit(void)
+{
+ return ioread8(mem) & 0x1;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id ds1302_dt_ids[] = {
+ { .compatible = "ds,rtc-ds1302" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, ds1302_dt_ids);
+#endif
+
#else
#error "Add support for your platform"
#endif
@@ -216,7 +322,7 @@ static int __init ds1302_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;

- if (ds1302_hw_init()) {
+ if (ds1302_hw_init(pdev)) {
dev_err(&pdev->dev, "Failed to init communication channel");
return -EINVAL;
}
@@ -245,6 +351,7 @@ static struct platform_driver ds1302_platform_driver = {
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(ds1302_dt_ids),
},
};

--
1.8.4.3


\
 
 \ /
  Last update: 2013-12-13 03:41    [W:0.537 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site