lkml.org 
[lkml]   [2013]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support
Date
If a generic phy is present, call phy_init()/phy_exit(). This supports
generic phys that must be soft reset before power on.

Signed-off-by: Matt Porter <mporter@linaro.org>
---
drivers/usb/gadget/s3c-hsotg.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 7c5d8bd..e9683c2 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -3621,6 +3621,9 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
goto err_supplies;
}

+ if (hsotg->phy)
+ phy_init(hsotg->phy);
+
/* usb phy enable */
s3c_hsotg_phy_enable(hsotg);

@@ -3714,6 +3717,8 @@ static int s3c_hsotg_remove(struct platform_device *pdev)
}

s3c_hsotg_phy_disable(hsotg);
+ if (hsotg->phy)
+ phy_exit(hsotg->phy);
clk_disable_unprepare(hsotg->clk);

return 0;
--
1.8.4


\
 
 \ /
  Last update: 2013-12-13 01:41    [W:1.118 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site