lkml.org 
[lkml]   [2013]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH v2 0/5] net: macb updates
From
Hi Soren,

On Tue, Dec 10, 2013 at 4:07 PM, Soren Brinkmann
<soren.brinkmann@xilinx.com> wrote:

> Soren Brinkmann (5):
> net: macb: Adjust tx_clk when link speed changes

This patch causes build issues on some at91 platforms, namely
at91sam9263 that lacks programmable clocks. So it doesn't implement
clk_set_rate() and clk_round_rate().

I don't know if there's any reasonable config option to check for
(that wouldn't add at91-specific stuff to the driver which we don't
want). So I suspect the best way would be to implement dummy versions
for at91 when CONFIG_AT91_PROGRAMMABLE_CLOCKS isn't set.

Nicolas, you OK with that? It'd be something like the below
(copy-paste, whitespace damage, just RFC):

diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 6b2630a..17c52a7 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -459,6 +459,22 @@ static void __init init_programmable_clock(struct clk *clk)
clk->rate_hz = parent->rate_hz / pmc_prescaler_divider(pckr);
}

+#else /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ if (rate == clk_get_rate(clk))
+ return 0;
+
+ return -EINVAL;
+}
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ /* There's really nothing sane to return here. */
+ return clk_get_rate(clk);
+}
+
#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */

\
 
 \ /
  Last update: 2013-12-12 08:21    [W:0.074 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site