Messages in this thread Patch in this message |  | | From | Matt Porter <> | Subject | [PATCH v5 2/9] staging: dwc2: update DT binding to add generic clock/phy properties | Date | Thu, 12 Dec 2013 08:26:03 -0500 |
| |
dwc2/s3c-hsotg require a single clock to be specified and optionally a generic phy. On the s3c-hsotg driver old style USB phy support is present as a fallback so the generic phy properties are optional.
Signed-off-by: Matt Porter <mporter@linaro.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> --- Documentation/devicetree/bindings/staging/dwc2.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/staging/dwc2.txt b/Documentation/devicetree/bindings/staging/dwc2.txt index 1a1b7cf..a1753ed 100644 --- a/Documentation/devicetree/bindings/staging/dwc2.txt +++ b/Documentation/devicetree/bindings/staging/dwc2.txt @@ -5,6 +5,14 @@ Required properties: - compatible : "snps,dwc2" - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt +- clocks: clock provider specifier +- clock-names: shall be "otg" +Refer to clk/clock-bindings.txt for generic clock consumer properties + +Optional properties: +- phys: phy provider specifier +- phy-names: shall be "device" +Refer to phy/phy-bindings.txt for generic phy consumer properties Example: @@ -12,4 +20,8 @@ Example: compatible = "ralink,rt3050-usb, snps,dwc2"; reg = <0x101c0000 40000>; interrupts = <18>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; }; -- 1.8.4
|  |