lkml.org 
[lkml]   [2013]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: 50 Watt idle power regression bisected to Linux-3.10
From
Date
On Thu, 2013-12-12 at 06:57 +0100, Mike Galbraith wrote: 
> On Wed, 2013-12-11 at 21:45 -0800, H. Peter Anvin wrote:
> > As in it hangs at that point?
>
> Nope, it's still going.
>
> [1567.578340] pcc-cpufreq: (v1.10.00) driver loaded with frequency limits: 1064 MHz, 2266 MHz
>
> Funny, continents move faster :) Maybe missing a write or two.

When I get back it may be done booting. I'm gonna let it try for grins
while I'm away, then take a peek, see if I can spot it.

[ 1567.578340] pcc-cpufreq: (v1.10.00) driver loaded with frequency limits: 1064 MHz, 2266 MHz
done
Starting HAL daemon done


Setting up (localfs) network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8 done
eth0 device: Broadcom Corporation NetXtreme II BCM5709 Gig
No configuration found for eth0 unused
eth1 device: Broadcom Corporation NetXtreme II BCM5709 Gig
No configuration found for eth1 unused
eth2 device: NetXen Incorporated NX3031 Multifunction 1/10
[ 2457.114007] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 2457.114455] netxen_nic: eth2 NIC Link is up
[ 2457.223582] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
eth2 IP address: 0.0.0.0/32



\
 
 \ /
  Last update: 2013-12-12 07:41    [W:0.093 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site