lkml.org 
[lkml]   [2013]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 0/3] Exynos 5410 support
On 12/10/13 23:26, Vyacheslav Tyrtov wrote:
> The series of patches represent support of Exynos 5410 SoC
>
> The Exynos 5410 is the first Samsung SoC based on bigLITTLE architecture
>
> Patches add new platform description, support of clock controller and device
> tree for Exynos 5410.
>
> Dual cluster support for Exynos 5410 (EDCS) has been removed from this series
> This patches is activating only the big cluster (all A15 cores)
>
> EDCS patch, which allows all 8 CPU cores (4 x A7 and 4 x A15)
> to run at the same time, will be released separately
>
> Has been build on v3.13-rc3
> Has been tested on Exynos 5410 reference board (exynos_defconfig)
>
> Thanks for all your comments to Tomasz Figa, Dave Martin and Nicolas Pitre.
> I hope, this is enough clean and hasn't any dependencies to go through
> Samsung tree. Kukjin, what do you think about it?
>

OK, looks good and I've applied.

Thanks,
Kukjin


> Vyacheslav.
>
>
> Changelog:
>
> v5:
> EDCS removed to separate patch.
>
> In arch/arm/mach-exynos/Kconfig
> 1. Removed select ARM_CCI and MCPM.
> In arch/arm/mach-exynos/platsmp.c
> 1. Added correct boot_reg for exynos5410.
> In arch/arm/boot/dts/exynos5410.dtsi
> 1. Removed cortex-a7 cpu nodes and cci node.
>
> v4:
> In arch/arm/mach-exynos/edcs.c
> 1. Renamed all exynos_ prefixes to edcs_.
> 2. Reworked edcs_core_power_up/down functions.
> 3. Removed exynos_core_power_control function.
> 4. Added this_core_to_pcpu function.
> 5. Added core_power_state function which detects if cpu is being reset.
> 6. Replaced cache flush sequences with v7_exit_coherency_flush().
> 7. exynos_core_power_down moved to lock protected area.
> 8. edcs_power_down_finish implemented.
> In Documentation/devicetree/bindings/clock/exynos5410-clock.txt
> 1. External clocks documented.
> In arch/arm/boot/dts/exynos5410-smdk5410.dts
> 1. oscclk node corrected according to ePAPR recommendation.
> In arch/arm/boot/dts/exynos5410.dtsi
> 1. mct@101C0000 node renamed to timer@101C0000.
> 2. "interrupt-controller" line removed from mct node.
> 3. mct_map renamed to interrupt_map.
> In arch/arm/mach-exynos/Kconfig
> 1. some cosmetic corrections.
> In include/dt-bindings/clock/exynos5410.h
> 1. Unnecessary defines removed.
>
> v3:
> In drivers/clk/samsung/clk-exynos5410.c
> 1. Fixed rate clock "samsung,clock-oscclk" removed.
> In arch/arm/boot/dts/exynos5410.dtsi
> 1. In mct node clock CLK_FIN_PLL replaced with generic fixed rate oscclk.
> In arch/arm/boot/dts/exynos5410-smdk5410.dts
> 1. Fixed rate oscclk clock added.
> In arch/arm/mach-exynos/edcs.c
> 1. Added write memory barrier in exynos_core_power_control function.
> 2. __raw_readl/__raw_writel replaced with readl_relaxed/writel_relaxed.
> 3. #define added for some magic constants.
> 4. Disabled the GIC CPU interface in exynos_power_down function.
>
> v2:
> In drivers/clk/samsung/clk-exynos5410.c
> 1. Clock driver converted to use preprocessor macros instead of enums.
> Clock IDs now defined in include/dt-bindings/clock/exynos5410.h.
> 2. Unused spinlock removed.
> 3. Function exynos5410_clk_init defined as static.
> Struct exynos5410_fixed_rate_ext_clks defined as static.
> Struct exynos5410_mux_clks defined as static.
> Struct exynos5410_div_clks defined as static.
> Struct exynos5410_gate_clks defined as static.
> 4. Removed aliases.
> 5. Pll's magic register offsets defined as preprocessor macros.
> 6. Redundant check of device_node pointer removed.
>
> In arch/arm/boot/dts/exynos5410.dtsi
> 1. dwmmcX nodes renamed to mmc.
> dwmmc_X renamed to mmc_X.
> dwmmc status="disabled" field added.
> fifo-depth field moved from arch/arm/boot/dts/exynos5410-smdk5410.dts
> 2. Blank lines added where necessary.
> 3. cpu@ suffixes corrected.
> 4. edcs node removed.
> 5. Hexadecimal characters case corrected.
> 6. Clock IDs replaced with preprocessor macros.
>
> In arch/arm/boot/dts/exynos5410-smdk5410.dts
> 1. status = "okay" field added to mmc nodes.
>
> In arch/arm/mach-exynos/edcs.c
> 1. "kfs_" prefix replaced with "edcs_"
> 2. EDCS_CPUS_PER_CLUSTER and EDCS_CLUSTERS defined instead of MCPM's values.
> 3. Cache handling sequence borrowed from arch/arm/mach-vexpress/tc2_pm.c
> 4. mcpm_sync_init() call added.
> 5. power management functions reworked.
>
> Other
> 1. Documentation/devicetree/bindings/clock/exynos5410-clock.txt corrected.
> 2. Removed smdk5410_defconfig. Instead SOC_EXYNOS5410 now selects MCPM and
> ARM_CCI in arch/arm/mach-exynos/Kconfig.
> 3. edcs_status driver removed.
>
> Tarek Dakhran (3):
> ARM: EXYNOS: Add support for EXYNOS5410 SoC
> clk: exynos5410: register clocks using common clock framework
> ARM: dts: Add initial device tree support for EXYNOS5410
>
> .../devicetree/bindings/clock/exynos5410-clock.txt | 54 +++++
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/exynos5410-smdk5410.dts | 72 +++++++
> arch/arm/boot/dts/exynos5410.dtsi | 145 +++++++++++++
> arch/arm/mach-exynos/Kconfig | 10 +
> arch/arm/mach-exynos/common.c | 18 ++
> arch/arm/mach-exynos/include/mach/map.h | 1 +
> arch/arm/mach-exynos/mach-exynos5-dt.c | 1 +
> arch/arm/mach-exynos/platsmp.c | 2 +
> arch/arm/plat-samsung/include/plat/cpu.h | 8 +
> arch/arm/plat-samsung/include/plat/map-s5p.h | 3 +
> drivers/clk/samsung/Makefile | 1 +
> drivers/clk/samsung/clk-exynos5410.c | 239 +++++++++++++++++++++
> include/dt-bindings/clock/exynos5410.h | 32 +++
> 14 files changed, 587 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/exynos5410-clock.txt
> create mode 100644 arch/arm/boot/dts/exynos5410-smdk5410.dts
> create mode 100644 arch/arm/boot/dts/exynos5410.dtsi
> create mode 100644 drivers/clk/samsung/clk-exynos5410.c
> create mode 100644 include/dt-bindings/clock/exynos5410.h
>


\
 
 \ /
  Last update: 2013-12-11 23:41    [W:0.261 / U:0.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site