lkml.org 
[lkml]   [2013]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] phy: Add exynos-phy driver
On 11/12/13 10:54, Kishon Vijay Abraham I wrote:
> On Wednesday 27 November 2013 06:56 PM, Tomasz Stanislawski wrote:
>> > Hello everyone,
>> > The Samsung SoCs from Exynos family are enhanced with a bunch of switches
>> > dedicated for IP blocks. Those switches are called PHYs in Exynos
>> > specification. They are usually controlled by a single bit in a single
>> > one-word-long register.
>
> So only enabling this switch is enough for the controller or some other actual
> PHY IP is needed along with this switch?
>
> However I'm not sure if the switch should be modelled as PHY as it is not a PHY
> in the real sense.

These are ordinary PHY devices embedded in an SoC. I wouldn't really call
them "switches", as they indeed provide the physical layer functionality
for various interfaces, like USB, HDMI, MIPI CSI/DSI, etc. Their control
interface is often very simple - usually only an enable and a reset
control bit. But that can't change the fact they are real PHY devices,
so let's not call them switches, that's just untrue.

Regards,
Sylwester


\
 
 \ /
  Last update: 2013-12-11 11:41    [W:0.040 / U:0.612 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site