lkml.org 
[lkml]   [2013]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 02/11] arm: pxa27x: support ICP DAS LP-8x4x
Date
On Tuesday 10 December 2013, Sergei Ianovich wrote:
> On Tue, 2013-12-10 at 13:33 +0100, Linus Walleij wrote:
> > On Fri, Dec 6, 2013 at 6:14 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> > > On Friday 06 December 2013, Sergei Ianovich wrote:
> > >> On Fri, 2013-12-06 at 01:40 +0100, Arnd Bergmann wrote:
> > >>
> > >> > > +
> > >> > > +static struct irq_chip lp8x4x_irq_chip = {
> > >> > > + .name = "FPGA",
> > >> > > + .irq_ack = lp8x4x_ack_irq,
> > >> > > + .irq_mask = lp8x4x_mask_irq,
> > >> > > + .irq_unmask = lp8x4x_unmask_irq,
> > >> > > +};
> > >> >
> > >> > Please try to move the irqchip code to drivers/irqchip/.
> > >>
> > >> CONFIG_IRQCHIP depends on CONFIG_OF_IRQ which in turn depends on Open
> > >> Firmware.
> > >
> > > Hmm, I wonder if we should try to change Kconfig then. Let's leave it
> > > alone for now, maybe Linus Walleij has some comments since he has
> > > been looking into moving drivers out in the past.
> >
> > I don't get this, if the subarch has deps in place for IRQCHIP and
> > OF_IRQ just move the implementation to drivers/irqchip/foo.c
> > edit drivers/irqchip/Makefile to compile the file for ARCH_FOO.
> > What would the problem be? It's not like having the irqchip in the
> > object is optional...
>
> This chip is used only of one machine and only required for
> machine-special devices. If those devices are not selected, the chip
> will just waist memory.

It should be possible to make it a loadable module, with deferred
probing etc. You wouldn't use IRQCHIP_DECLARE() for this though,
but instead have a platform driver that sets up the irq domain.

It probably makes sense to have a single driver file for the
FPGA device that does this, and only split out the other devices
from it that consume the irqs.

> > Another way is to create a separate Kconfig entry for it in
> > drivers/irqchip/Kconfig if you want the set-up to be more
> > distributed, but that is usually just done when the irqchip is
> > used on more than one platform.
>
> Please consult, how to approach this driver using device tree. If I
> assign an "interrupts" property in the node, and the property will point
> to pxa-gpio interrupt controller using a phandle, is there a guaranty
> that my device will be probed later than pxa-gpio interrupt controller?

Yes, the interrupt controllers get probed in the right order based
on their "interrupt-parent" properties, starting with the root
controller.

If you have a platform driver rather than IRQCHIP_DECLARE(), that gets
initialized after all IRQCHIP_DECLARE() calls, so it's not a problem.

If both the gpio chip and the fpga are loadable modules, it's still
fine, but the probe() function for the fpga needs to call
irq_of_parse_and_map() to get the parent IRQ and bail out of
-EPROBE_DEFER if it gets this error while trying to map the
gpio IRQ.

Arnd


\
 
 \ /
  Last update: 2013-12-10 23:21    [W:0.274 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site