lkml.org 
[lkml]   [2013]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 7/8] x86: patch all traced function calls using the int3-based framework
Date
Let's continue with replacing the existing Int3-based framework in ftrace with
the new generic function introduced by the commit fd4363fff3d9 (x86: Introduce
int3 (breakpoint)-based instruction patching)

This time use it in ftrace_replace_code that modifies all the watched function
calls.

If we use text_poke_bp in ftrace_make_nop, ftrace_make_call, ftrace_modify_call,
it would be possible to get rid of the x86-specific ftrace_replace_code
implementation and use the generic code.

This would be really lovely change. Unfortunately, the code would be slow
because syncing on each CPU is relatively expensive operation. For example,
I tried to switch between 7 tracers: blk, branch, function_graph, wakeup_rt,
irqsoff, function, and nop. Every tracer has also been enabled and disabled.
With 500 cycles, I got these times with the original code:

real 16m14.390s 16m15.200s 16m19.632s
user 0m0.028s 0m0.024s 0m0.028s
sys 0m23.788s 0m23.812s 0m23.804s

It slowed down after using text_poke_bp for each record separately:

real 29m45.785s 29m47.504s 29m44.016
user 0m0.004s 0m0.004s 0m0.004s
sys 0m15.776s 0m16.088s 0m16.192s

Hence, we implemented the more complex text_poke_bp_iter. When we use it,
we get the times:

real 17m19.055s 17m29.200s 17m27.456
user 0m0.052s 0m0.056s 0m0.052s
sys 0m20.236s 0m20.068s 0m20.264s

It is slightly slower than the ftrace-specific code. Well, this is the
cost for using a generic API that can be used also in other locations.

Signed-off-by: Petr Mladek <pmladek@suse.cz>
---
arch/x86/kernel/alternative.c | 14 +-
arch/x86/kernel/ftrace.c | 428 +++++++-----------------------------------
arch/x86/kernel/traps.c | 10 -
include/linux/ftrace.h | 6 -
4 files changed, 80 insertions(+), 378 deletions(-)

diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 03abf9abf681..e5c02af3a8cc 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -613,7 +613,7 @@ void __kprobes text_poke_or_die(void *addr, const void *opcode, size_t len)
* responsible for setting the patched code read-write. This is more effective
* only when you patch many addresses at the same time.
*/
-static int text_poke_part(void *addr, const void *opcode, size_t len)
+static int notrace text_poke_part(void *addr, const void *opcode, size_t len)
{
int ret;

@@ -662,7 +662,7 @@ static void *bp_int3_handler, *bp_int3_addr;
static size_t bp_int3_len;
static void *(*bp_int3_is_handled)(const unsigned long ip);

-int poke_int3_handler(struct pt_regs *regs)
+int notrace poke_int3_handler(struct pt_regs *regs)
{
/* bp_patching_in_progress */
smp_rmb();
@@ -771,7 +771,7 @@ void text_poke_bp_or_die(void *addr, const void *opcode, size_t len,
BUG_ON(err);
}

-static int text_poke_check(void *addr, const void *opcode, size_t len)
+static int notrace text_poke_check(void *addr, const void *opcode, size_t len)
{
unsigned char actual[MAX_PATCH_LEN];
int ret;
@@ -787,7 +787,7 @@ static int text_poke_check(void *addr, const void *opcode, size_t len)
return 0;
}

-static int add_iter_breakpoint(struct text_poke_bp_iter *iterator,
+static int notrace add_iter_breakpoint(struct text_poke_bp_iter *iterator,
void *iter)
{
void *addr;
@@ -809,7 +809,7 @@ static int add_iter_breakpoint(struct text_poke_bp_iter *iterator,
return ret;
}

-static int update_iter_code(struct text_poke_bp_iter *iterator,
+static int notrace update_iter_code(struct text_poke_bp_iter *iterator,
void *iter)
{
void *addr;
@@ -827,7 +827,7 @@ static int update_iter_code(struct text_poke_bp_iter *iterator,
bp_int3_len - sizeof(bp_int3));
}

-static int finish_iter_update(struct text_poke_bp_iter *iterator,
+static int notrace finish_iter_update(struct text_poke_bp_iter *iterator,
void *iter)
{
void *addr;
@@ -848,7 +848,7 @@ static int finish_iter_update(struct text_poke_bp_iter *iterator,
return ret;
}

-static void recover_iter(struct text_poke_bp_iter *iterator,
+static void notrace recover_iter(struct text_poke_bp_iter *iterator,
void *iter)
{
void *addr;
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 5ade40e4a175..92fe8cac0802 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -127,23 +127,6 @@ static const unsigned char *ftrace_nop_replace(void)
}

static int
-ftrace_modify_code_direct(unsigned long ip, unsigned const char *old_code,
- unsigned const char *new_code)
-{
- int ret;
-
- ret = ftrace_check_code(ip, old_code);
-
- /* replace the text with the new text */
- if (!ret && do_ftrace_mod_code(ip, new_code))
- return -EPERM;
-
- sync_core();
-
- return 0;
-}
-
-static int
ftrace_modify_code(unsigned long ip, unsigned const char *old_code,
unsigned const char *new_code)
{
@@ -168,20 +151,7 @@ int ftrace_make_nop(struct module *mod,
old = ftrace_call_replace(ip, addr);
new = ftrace_nop_replace();

- /*
- * On boot up, and when modules are loaded, the MCOUNT_ADDR
- * is converted to a nop, and will never become MCOUNT_ADDR
- * again. This code is either running before SMP (on boot up)
- * or before the code will ever be executed (module load).
- * We do not want to use the breakpoint version in this case,
- * just modify the code directly.
- */
- if (addr == MCOUNT_ADDR)
- return ftrace_modify_code_direct(rec->ip, old, new);
-
- /* Normal cases use add_brk_on_nop */
- WARN_ONCE(1, "invalid use of ftrace_make_nop");
- return -EINVAL;
+ return ftrace_modify_code(ip, old, new);
}

int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
@@ -192,44 +162,10 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
old = ftrace_nop_replace();
new = ftrace_call_replace(ip, addr);

- /* Should only be called when module is loaded */
- return ftrace_modify_code_direct(rec->ip, old, new);
+ return ftrace_modify_code(ip, old, new);
}

/*
- * The modifying_ftrace_code is used to tell the breakpoint
- * handler to call ftrace_int3_handler(). If it fails to
- * call this handler for a breakpoint added by ftrace, then
- * the kernel may crash.
- *
- * As atomic_writes on x86 do not need a barrier, we do not
- * need to add smp_mb()s for this to work. It is also considered
- * that we can not read the modifying_ftrace_code before
- * executing the breakpoint. That would be quite remarkable if
- * it could do that. Here's the flow that is required:
- *
- * CPU-0 CPU-1
- *
- * atomic_inc(mfc);
- * write int3s
- * <trap-int3> // implicit (r)mb
- * if (atomic_read(mfc))
- * call ftrace_int3_handler()
- *
- * Then when we are finished:
- *
- * atomic_dec(mfc);
- *
- * If we hit a breakpoint that was not set by ftrace, it does not
- * matter if ftrace_int3_handler() is called or not. It will
- * simply be ignored. But it is crucial that a ftrace nop/caller
- * breakpoint is handled. No other user should ever place a
- * breakpoint on an ftrace nop/caller location. It must only
- * be done by this code.
- */
-atomic_t modifying_ftrace_code __read_mostly;
-
-/*
* Should never be called:
* As it is only called by __ftrace_replace_code() which is called by
* ftrace_replace_code() that x86 overrides, and by ftrace_update_code()
@@ -267,80 +203,6 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
}

/*
- * A breakpoint was added to the code address we are about to
- * modify, and this is the handle that will just skip over it.
- * We are either changing a nop into a trace call, or a trace
- * call to a nop. While the change is taking place, we treat
- * it just like it was a nop.
- */
-int ftrace_int3_handler(struct pt_regs *regs)
-{
- if (WARN_ON_ONCE(!regs))
- return 0;
-
- if (!ftrace_location(regs->ip - 1))
- return 0;
-
- regs->ip += MCOUNT_INSN_SIZE - 1;
-
- return 1;
-}
-
-static int ftrace_write(unsigned long ip, const char *val, int size)
-{
- /*
- * On x86_64, kernel text mappings are mapped read-only with
- * CONFIG_DEBUG_RODATA. So we use the kernel identity mapping instead
- * of the kernel text mapping to modify the kernel text.
- *
- * For 32bit kernels, these mappings are same and we can use
- * kernel identity mapping to modify code.
- */
- if (within(ip, (unsigned long)_text, (unsigned long)_etext))
- ip = (unsigned long)__va(__pa_symbol(ip));
-
- return probe_kernel_write((void *)ip, val, size);
-}
-
-static int add_break(unsigned long ip, const char *old)
-{
- unsigned char replaced[MCOUNT_INSN_SIZE];
- unsigned char brk = BREAKPOINT_INSTRUCTION;
-
- if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
- return -EFAULT;
-
- /* Make sure it is what we expect it to be */
- if (memcmp(replaced, old, MCOUNT_INSN_SIZE) != 0)
- return -EINVAL;
-
- if (ftrace_write(ip, &brk, 1))
- return -EPERM;
-
- return 0;
-}
-
-static int add_brk_on_call(struct dyn_ftrace *rec, unsigned long addr)
-{
- unsigned const char *old;
- unsigned long ip = rec->ip;
-
- old = ftrace_call_replace(ip, addr);
-
- return add_break(rec->ip, old);
-}
-
-
-static int add_brk_on_nop(struct dyn_ftrace *rec)
-{
- unsigned const char *old;
-
- old = ftrace_nop_replace();
-
- return add_break(rec->ip, old);
-}
-
-/*
* If the record has the FTRACE_FL_REGS set, that means that it
* wants to convert to a callback that saves all regs. If FTRACE_FL_REGS
* is not not set, then it wants to convert to the normal callback.
@@ -366,275 +228,131 @@ static unsigned long get_ftrace_old_addr(struct dyn_ftrace *rec)
return (unsigned long)FTRACE_ADDR;
}

-static int add_breakpoints(struct dyn_ftrace *rec, int enable)
-{
- unsigned long ftrace_addr;
- int ret;
-
- ret = ftrace_test_record(rec, enable);
-
- ftrace_addr = get_ftrace_addr(rec);
-
- switch (ret) {
- case FTRACE_UPDATE_IGNORE:
- return 0;
-
- case FTRACE_UPDATE_MAKE_CALL:
- /* converting nop to call */
- return add_brk_on_nop(rec);
-
- case FTRACE_UPDATE_MODIFY_CALL_REGS:
- case FTRACE_UPDATE_MODIFY_CALL:
- ftrace_addr = get_ftrace_old_addr(rec);
- /* fall through */
- case FTRACE_UPDATE_MAKE_NOP:
- /* converting a call to a nop */
- return add_brk_on_call(rec, ftrace_addr);
- }
- return 0;
-}
+struct ftrace_tp_iter {
+ struct ftrace_rec_iter *rec_iter;
+ struct dyn_ftrace *rec;
+ int enable;
+};

-/*
- * On error, we need to remove breakpoints. This needs to
- * be done caefully. If the address does not currently have a
- * breakpoint, we know we are done. Otherwise, we look at the
- * remaining 4 bytes of the instruction. If it matches a nop
- * we replace the breakpoint with the nop. Otherwise we replace
- * it with the call instruction.
- */
-static int remove_breakpoint(struct dyn_ftrace *rec)
+static struct ftrace_tp_iter *ftrace_tp_set_record(struct ftrace_tp_iter *tp_iter)
{
- unsigned char ins[MCOUNT_INSN_SIZE];
- unsigned char brk = BREAKPOINT_INSTRUCTION;
- const unsigned char *nop;
- unsigned long ftrace_addr;
- unsigned long ip = rec->ip;
-
- /* If we fail the read, just give up */
- if (probe_kernel_read(ins, (void *)ip, MCOUNT_INSN_SIZE))
- return -EFAULT;
+ if (!tp_iter->rec_iter)
+ return NULL;

- /* If this does not have a breakpoint, we are done */
- if (ins[0] != brk)
- return -1;
-
- nop = ftrace_nop_replace();
-
- /*
- * If the last 4 bytes of the instruction do not match
- * a nop, then we assume that this is a call to ftrace_addr.
- */
- if (memcmp(&ins[1], &nop[1], MCOUNT_INSN_SIZE - 1) != 0) {
- /*
- * For extra paranoidism, we check if the breakpoint is on
- * a call that would actually jump to the ftrace_addr.
- * If not, don't touch the breakpoint, we make just create
- * a disaster.
- */
- ftrace_addr = get_ftrace_addr(rec);
- nop = ftrace_call_replace(ip, ftrace_addr);
-
- if (memcmp(&ins[1], &nop[1], MCOUNT_INSN_SIZE - 1) == 0)
- goto update;
-
- /* Check both ftrace_addr and ftrace_old_addr */
- ftrace_addr = get_ftrace_old_addr(rec);
- nop = ftrace_call_replace(ip, ftrace_addr);
-
- if (memcmp(&ins[1], &nop[1], MCOUNT_INSN_SIZE - 1) != 0)
- return -EINVAL;
- }
-
- update:
- return probe_kernel_write((void *)ip, &nop[0], 1);
+ tp_iter->rec = ftrace_rec_iter_record(tp_iter->rec_iter);
+ return tp_iter;
}

-static int add_update_code(unsigned long ip, unsigned const char *new)
+void *ftrace_tp_iter_start(void *init)
{
- /* skip breakpoint */
- ip++;
- new++;
- if (ftrace_write(ip, new, MCOUNT_INSN_SIZE - 1))
- return -EPERM;
- return 0;
+ struct ftrace_tp_iter *tp_iter = init;
+
+ tp_iter->rec_iter = ftrace_rec_iter_start();
+ return ftrace_tp_set_record(tp_iter);
}

-static int add_update_call(struct dyn_ftrace *rec, unsigned long addr)
+void *ftrace_tp_iter_next(void *cur)
{
- unsigned long ip = rec->ip;
- unsigned const char *new;
+ struct ftrace_tp_iter *tp_iter = cur;

- new = ftrace_call_replace(ip, addr);
- return add_update_code(ip, new);
+ tp_iter->rec_iter = ftrace_rec_iter_next(tp_iter->rec_iter);
+ return ftrace_tp_set_record(tp_iter);
}

-static int add_update_nop(struct dyn_ftrace *rec)
+void *ftrace_tp_iter_get_addr(void *cur)
{
- unsigned long ip = rec->ip;
- unsigned const char *new;
+ struct ftrace_tp_iter *tp_iter = cur;

- new = ftrace_nop_replace();
- return add_update_code(ip, new);
+ return (void *)(tp_iter->rec->ip);
}

-static int add_update(struct dyn_ftrace *rec, int enable)
+const void *ftrace_tp_iter_get_opcode(void *cur)
{
- unsigned long ftrace_addr;
+ struct ftrace_tp_iter *tp_iter = cur;
+ unsigned long addr;
int ret;

- ret = ftrace_test_record(rec, enable);
-
- ftrace_addr = get_ftrace_addr(rec);
+ ret = ftrace_test_record(tp_iter->rec, tp_iter->enable);

switch (ret) {
- case FTRACE_UPDATE_IGNORE:
- return 0;
+ case FTRACE_UPDATE_MAKE_NOP:
+ return ftrace_nop_replace();

- case FTRACE_UPDATE_MODIFY_CALL_REGS:
- case FTRACE_UPDATE_MODIFY_CALL:
case FTRACE_UPDATE_MAKE_CALL:
- /* converting nop to call */
- return add_update_call(rec, ftrace_addr);
+ case FTRACE_UPDATE_MODIFY_CALL:
+ case FTRACE_UPDATE_MODIFY_CALL_REGS:
+ addr = get_ftrace_addr(tp_iter->rec);
+ return ftrace_call_replace(tp_iter->rec->ip, addr);

- case FTRACE_UPDATE_MAKE_NOP:
- /* converting a call to a nop */
- return add_update_nop(rec);
+ case FTRACE_UPDATE_IGNORE:
+ default: /* unknown ftrace bug */
+ return NULL;
}
-
- return 0;
-}
-
-static int finish_update_call(struct dyn_ftrace *rec, unsigned long addr)
-{
- unsigned long ip = rec->ip;
- unsigned const char *new;
-
- new = ftrace_call_replace(ip, addr);
-
- if (ftrace_write(ip, new, 1))
- return -EPERM;
-
- return 0;
-}
-
-static int finish_update_nop(struct dyn_ftrace *rec)
-{
- unsigned long ip = rec->ip;
- unsigned const char *new;
-
- new = ftrace_nop_replace();
-
- if (ftrace_write(ip, new, 1))
- return -EPERM;
- return 0;
}

-static int finish_update(struct dyn_ftrace *rec, int enable)
+const void *ftrace_tp_iter_get_old_opcode(void *cur)
{
- unsigned long ftrace_addr;
+ struct ftrace_tp_iter *tp_iter = cur;
+ unsigned long old_addr;
int ret;

- ret = ftrace_update_record(rec, enable);
-
- ftrace_addr = get_ftrace_addr(rec);
+ ret = ftrace_test_record(tp_iter->rec, tp_iter->enable);

switch (ret) {
- case FTRACE_UPDATE_IGNORE:
- return 0;
-
- case FTRACE_UPDATE_MODIFY_CALL_REGS:
- case FTRACE_UPDATE_MODIFY_CALL:
case FTRACE_UPDATE_MAKE_CALL:
- /* converting nop to call */
- return finish_update_call(rec, ftrace_addr);
+ return ftrace_nop_replace();

case FTRACE_UPDATE_MAKE_NOP:
- /* converting a call to a nop */
- return finish_update_nop(rec);
- }
+ case FTRACE_UPDATE_MODIFY_CALL:
+ case FTRACE_UPDATE_MODIFY_CALL_REGS:
+ old_addr = get_ftrace_old_addr(tp_iter->rec);
+ return ftrace_call_replace(tp_iter->rec->ip, old_addr);

- return 0;
+ case FTRACE_UPDATE_IGNORE:
+ default: /* unknown ftrace bug */
+ return NULL;
+ }
}

-static void do_sync_core(void *data)
+int ftrace_tp_iter_finish(void *cur)
{
- sync_core();
-}
+ struct ftrace_tp_iter *tp_iter = cur;

-static void run_sync(void)
-{
- int enable_irqs = irqs_disabled();
-
- /* We may be called with interrupts disbled (on bootup). */
- if (enable_irqs)
- local_irq_enable();
- on_each_cpu(do_sync_core, NULL, 1);
- if (enable_irqs)
- local_irq_disable();
+ ftrace_update_record(tp_iter->rec, tp_iter->enable);
+ return 0;
}

void ftrace_replace_code(int enable)
{
- struct ftrace_rec_iter *iter;
- struct dyn_ftrace *rec;
- const char *report = "adding breakpoints";
- int count = 0;
+ struct text_poke_bp_iter tp_bp_iter;
+ struct ftrace_tp_iter tp_iter;
int ret;

- for_ftrace_rec_iter(iter) {
- rec = ftrace_rec_iter_record(iter);
-
- ret = add_breakpoints(rec, enable);
- if (ret)
- goto remove_breakpoints;
- count++;
- }
-
- run_sync();
-
- report = "updating code";
-
- for_ftrace_rec_iter(iter) {
- rec = ftrace_rec_iter_record(iter);
-
- ret = add_update(rec, enable);
- if (ret)
- goto remove_breakpoints;
- }
+ tp_iter.enable = enable;

- run_sync();
+ tp_bp_iter.init = (void *)&tp_iter;
+ tp_bp_iter.len = MCOUNT_INSN_SIZE;
+ tp_bp_iter.start = ftrace_tp_iter_start;
+ tp_bp_iter.next = ftrace_tp_iter_next;
+ tp_bp_iter.get_addr = ftrace_tp_iter_get_addr;
+ tp_bp_iter.get_opcode = ftrace_tp_iter_get_opcode;
+ tp_bp_iter.get_old_opcode = ftrace_tp_iter_get_old_opcode;
+ tp_bp_iter.finish = ftrace_tp_iter_finish;
+ tp_bp_iter.is_handled = (void *(*)(const unsigned long))ftrace_location;

- report = "removing breakpoints";
+ ret = text_poke_bp_list(&tp_bp_iter);

- for_ftrace_rec_iter(iter) {
- rec = ftrace_rec_iter_record(iter);
-
- ret = finish_update(rec, enable);
- if (ret)
- goto remove_breakpoints;
- }
-
- run_sync();
-
- return;
-
- remove_breakpoints:
- ftrace_bug(ret, rec ? rec->ip : 0);
- printk(KERN_WARNING "Failed on %s (%d):\n", report, count);
- for_ftrace_rec_iter(iter) {
- rec = ftrace_rec_iter_record(iter);
- remove_breakpoint(rec);
- }
+ if (ret)
+ ftrace_bug(ret, (unsigned long)(tp_bp_iter.fail_addr));
}

+/*
+ * The code is modified using Int3 guard,
+ * so we do not need to call the stop machine
+ */
void arch_ftrace_update_code(int command)
{
- /* See comment above by declaration of modifying_ftrace_code */
- atomic_inc(&modifying_ftrace_code);
-
ftrace_modify_all_code(command);
-
- atomic_dec(&modifying_ftrace_code);
}

int __init ftrace_dyn_arch_init(void *data)
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index b857ed890b4c..69ad8cf8b7f0 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -50,7 +50,6 @@
#include <asm/processor.h>
#include <asm/debugreg.h>
#include <linux/atomic.h>
-#include <asm/ftrace.h>
#include <asm/traps.h>
#include <asm/desc.h>
#include <asm/i387.h>
@@ -319,15 +318,6 @@ dotraplinkage void __kprobes notrace do_int3(struct pt_regs *regs, long error_co
{
enum ctx_state prev_state;

-#ifdef CONFIG_DYNAMIC_FTRACE
- /*
- * ftrace must be first, everything else may cause a recursive crash.
- * See note by declaration of modifying_ftrace_code in ftrace.c
- */
- if (unlikely(atomic_read(&modifying_ftrace_code)) &&
- ftrace_int3_handler(regs))
- return;
-#endif
if (poke_int3_handler(regs))
return;

diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 31ea4b428360..fe50347cf18e 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -383,12 +383,6 @@ struct ftrace_rec_iter *ftrace_rec_iter_start(void);
struct ftrace_rec_iter *ftrace_rec_iter_next(struct ftrace_rec_iter *iter);
struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter);

-#define for_ftrace_rec_iter(iter) \
- for (iter = ftrace_rec_iter_start(); \
- iter; \
- iter = ftrace_rec_iter_next(iter))
-
-
int ftrace_update_record(struct dyn_ftrace *rec, int enable);
int ftrace_test_record(struct dyn_ftrace *rec, int enable);
void ftrace_run_stop_machine(int command);
--
1.8.4


\
 
 \ /
  Last update: 2013-12-10 17:01    [W:1.810 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site