lkml.org 
[lkml]   [2013]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] powerpc 8xx: Loading kernels over 8Mbytes without CONFIG_PIN_TLB

Le 11/12/2013 00:18, Scott Wood a écrit :
> On Wed, 2013-12-11 at 00:05 +0100, leroy christophe wrote:
>> Le 10/12/2013 23:24, Scott Wood a écrit :
>>> On Tue, 2013-12-10 at 12:29 +0100, Christophe Leroy wrote:
>>>> Today, the only way to load kernels whose size is greater than 8Mbytes is to
>>>> activate CONFIG_PIN_TLB. Otherwise, the physical memory initially mapped is
>>>> limited to 8Mbytes. This patch adds the capability to select the size of initial
>>>> memory between 8/16/24 Mbytes and this is regardless of whether CONFIG_PIN_TLB
>>>> is active or not. It allows to load "big" kernels (for instance when activating
>>>> CONFIG_LOCKDEP_SUPPORT) without having to activate CONFIG_PIN_TLB.
>>>>
>>>> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
>>>>
>>>> diff -ur a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
>>>> --- a/arch/powerpc/Kconfig
>>>> +++ b/arch/powerpc/Kconfig
>>>> @@ -980,6 +980,29 @@
>>>> config PIN_TLB
>>>> bool "Pinned Kernel TLBs (860 ONLY)"
>>>> depends on ADVANCED_OPTIONS && 8xx
>>>> +
>>>> +choice
>>>> + prompt "Initial Data Memory Mapped on 8xx"
>>>> + default 8xx_MAP_8M
>>>> + depends on ADVANCED_OPTIONS && 8xx
>>>> +
>>>> +config 8xx_INIT_MAP_8M
>>>> + bool "8 Mbytes"
>>>> +
>>>> +config 8xx_INIT_MAP_16M
>>>> + bool "16 Mbytes"
>>>> +
>>>> +config 8xx_INIT_MAP_24M
>>>> + bool "24 Mbytes"
>>> Are you working with a loader that passes initial-mapped-area size in r7
>>> as per ePAPR? If so, we could rely on that at runtime. If you're using
>>> a non-ancient U-Boot, it should qualify here even if it's not fully
>>> ePAPR compliant (it passes the value of the bootm_mapsize variable in
>>> r7).
>> Ok, let me check that. But it means that the size of the kernel I can
>> boot will depend on the initial memory mapped by uboot ? Isn't it
>> limitating ?
> The ePAPR IMA is supposed to be large enough to include the OS image,
> device tree, etc.
>
>> Even if uboot only maps 8Mbytes, why couldn't I be allowed to boot a
>> kernel having 10 Mbytes data if I have 32 Mbytes mem on the board ?
>> I don't like the idea of having to change the bootloader just because I
>> want to activate CONFIG_LOCKDEP to debug my kernel.
> Well, as noted, if you're using a non-ancient U-Boot you shouldn't have
> to change anything because it already implements r7. Now, the value of
> r7 it passes might be a lie as far as ePAPR is concerned, since it's
> supposed to represent what's actually mapped, but that's another matter.
>
> Even fixing that wouldn't mean you have to change U-Boot every time the
> kernel size changes; you'd just set it to something reasonable and be
> done with it. I'm not fond of adding kconfigs to hack around a problem
> that has already been addressed in the standard that governs the PPC
> boot process that U-Boot claims to implement.
Well, ok, that makes sense. I'll investigate around that solution.
>
>>>> -#ifdef CONFIG_PIN_TLB
>>>> +#if defined (CONFIG_8xx_INIT_MAP_16M) || defined (CONFIG_8xx_INIT_MAP_24M)
>>>> /* Map two more 8M kernel data pages.
>>>> */
>>>> +#ifdef CONFIG_PIN_TLB
>>>> addi r10, r10, 0x0100
>>>> mtspr SPRN_MD_CTR, r10
>>>> +#endif
>>>>
>>>> lis r8, KERNELBASE@h /* Create vaddr for TLB */
>>>> addis r8, r8, 0x0080 /* Add 8M */
>>>> @@ -858,15 +860,19 @@
>>>> addis r11, r11, 0x0080 /* Add 8M */
>>>> mtspr SPRN_MD_RPN, r11
>>>>
>>>> +#ifdef CONFIG_8xx_INIT_MAP_24M
>>>> +#ifdef CONFIG_PIN_TLB
>>>> addi r10, r10, 0x0100
>>>> mtspr SPRN_MD_CTR, r10
>>>> +#endif
>>> Are these ifdefs for CONFIG_PIN_TLB really needed? It shouldn't harm
>>> anything to use those entries even if they're not being pinned.
>> I'm not sure I understand your comment.
>> ifdef for CONFIG_PIN_TLB was already there before, but was enclosing the
>> whole block, so 24 Mbytes were automatically mapped when you selected
>> CONFIG_PIN_TLB and only 8 Mbytes were mapped when you didn't select
>> CONFIG_PIN_TLB.
>> I reduced the scope of those ifdefs so that they now apply on the
>> pinning only.
> There wasn't previously an ifdef specifically around the setting of
> SPRN_MD_CTR. That's new. There was an ifdef around the entire block,
> which has gone away because you are now trying to map more than 8M
> regardless of CONFIG_PIN_TLB, but that has nothing to do with whether
> there should be an ifdef around SPRN_MD_CTR.
>
>
Euh, ok, but then we have to fix it in the whole function, not only in
this block. Do you think it is worth doing it ?
Then we are back to the problem we discussed some months ago which is
that the 8xx is decrementing the MD_CTR after writting a TLB entry, and
if pinning is activated it decrements it out of the pinnable area. So it
would still be needed to:
* Reposition it for each entry for when the pinning is activated
* Make sure we set it out of the area at the end when the pinning is not
active hence the area not protected.
* Then we should probably reverse the entries, start at 31 and go down
to 28 instead of going from 28 to 31 as do today.
But is it worth doing such a big change which will not add anything
functionnaly speaking ?

Christophe
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-12-12 12:41    [W:0.079 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site