lkml.org 
[lkml]   [2013]   [Nov]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.11 42/94] md: Fix skipping recovery for read-only arrays.
Date
3.11-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lukasz Dorau <lukasz.dorau@intel.com>

commit 61e4947c99c4494336254ec540c50186d186150b upstream.

Since:
commit 7ceb17e87bde79d285a8b988cfed9eaeebe60b86
md: Allow devices to be re-added to a read-only array.

spares are activated on a read-only array. In case of raid1 and raid10
personalities it causes that not-in-sync devices are marked in-sync
without checking if recovery has been finished.

If a read-only array is degraded and one of its devices is not in-sync
(because the array has been only partially recovered) recovery will be skipped.

This patch adds checking if recovery has been finished before marking a device
in-sync for raid1 and raid10 personalities. In case of raid5 personality
such condition is already present (at raid5.c:6029).

Bug was introduced in 3.10 and causes data corruption.

Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/md/raid1.c | 1 +
drivers/md/raid10.c | 1 +
2 files changed, 2 insertions(+)

--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1479,6 +1479,7 @@ static int raid1_spare_active(struct mdd
}
}
if (rdev
+ && rdev->recovery_offset == MaxSector
&& !test_bit(Faulty, &rdev->flags)
&& !test_and_set_bit(In_sync, &rdev->flags)) {
count++;
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1782,6 +1782,7 @@ static int raid10_spare_active(struct md
}
sysfs_notify_dirent_safe(tmp->replacement->sysfs_state);
} else if (tmp->rdev
+ && tmp->rdev->recovery_offset == MaxSector
&& !test_bit(Faulty, &tmp->rdev->flags)
&& !test_and_set_bit(In_sync, &tmp->rdev->flags)) {
count++;



\
 
 \ /
  Last update: 2013-11-09 10:21    [W:0.728 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site