lkml.org 
[lkml]   [2013]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] usb: hub: Use correct reset for wedged USB3 devices that are NOTATTACHED
On Thu, 7 Nov 2013, Julius Werner wrote:

> This patch adds a check for USB_STATE_NOTATTACHED to the
> hub_port_warm_reset_required() workaround for ports that end up in
> Compliance Mode in hub_events() when trying to decide which reset
> function to use. Trying to call usb_reset_device() with a NOTATTACHED
> device will just fail and leave the port broken.
>
> Signed-off-by: Julius Werner <jwerner@chromium.org>
> ---
> drivers/usb/core/hub.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index e6b682c..0188056 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -4799,8 +4799,9 @@ static void hub_events(void)
> hub->ports[i - 1]->child;
>
> dev_dbg(hub_dev, "warm reset port %d\n", i);
> - if (!udev || !(portstatus &
> - USB_PORT_STAT_CONNECTION)) {
> + if (!udev ||
> + !(portstatus & USB_PORT_STAT_CONNECTION) ||
> + udev->state == USB_STATE_NOTATTACHED) {
> status = hub_port_reset(hub, i,
> NULL, HUB_BH_RESET_TIME,
> true);

Acked-by: Alan Stern <stern@rowland.harvard.edu>



\
 
 \ /
  Last update: 2013-11-08 18:21    [W:0.042 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site