Messages in this thread | | | Date | Fri, 8 Nov 2013 10:28:53 +0000 | From | Lee Jones <> | Subject | Re: [PATCH 1/1] Documentation/mfd: Fix typos in s2mps11.txt |
| |
As this is only a trivial patch, I'll take it out the hands of the already overloaded DT maintainers.
> Fixed trivial typos to improve readability. > > Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> > --- > Documentation/devicetree/bindings/mfd/s2mps11.txt | 9 +++++---- > 1 file changed, 5 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt > index c9332c6..0ff4e65 100644 > --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt > +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt > @@ -1,10 +1,10 @@ > > * Samsung S2MPS11 Voltage and Current Regulator > > -The Samsung S2MP211 is a multi-function device which includes voltage and > +The Samsung S2MPS11 is a multi-function device which includes voltage and
Nice catch eagle-eye!
> current regulators, RTC, charger controller and other sub-blocks. It is > -interfaced to the host controller using a I2C interface. Each sub-block is > -addressed by the host system using different I2C slave address. > +interfaced to the host controller using an I2C interface. Each sub-block is > +addressed by the host system using different I2C slave addresses. > > Required properties: > - compatible: Should be "samsung,s2mps11-pmic". > @@ -43,7 +43,8 @@ sub-node should be of the format as listed below. > > BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly > regulator-ramp-delay = <0> can be used for them to disable ramp delay. > - In absence of regulator-ramp-delay property, default ramp delay will be used. > + In the absence of regulator-ramp-delay property, default ramp delay will > + be used.
So if we're being pertinacity here, your correction isn't much better.
s/of regulator-ramp-delay property,/of {the,an} regulator-ramp-delay property, the
or
s/of regulator-ramp-delay property,/of regulator-ramp-delay, the
> NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set > for a particular group of BUCKs. So provide same regulator-ramp-delay<value>.
-- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |