lkml.org 
[lkml]   [2013]   [Nov]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCHv2 3/7] arm: dts: dra7: add bandgap entry
    Date
    This patch adds bandgap IP entry on DRA7 dtsi device tree file.

    Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
    ---
    arch/arm/boot/dts/dra7.dtsi | 12 ++++++++++++
    1 file changed, 12 insertions(+)
    ---
    Hi all,

    Difference from V1: now the BG node belongs to OCP.

    Tero, this is the patch you were asking for.

    Thanks,

    Eduardo

    diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
    index 3a746c2..d3d467b 100644
    --- a/arch/arm/boot/dts/dra7.dtsi
    +++ b/arch/arm/boot/dts/dra7.dtsi
    @@ -102,6 +102,18 @@
    pinctrl-single,function-mask = <0x3fffffff>;
    };

    + bandgap: bandgap {
    + reg = <0x4a0021e0 0xc
    + 0x4a00232c 0xc
    + 0x4a002380 0x2c
    + 0x4a0023C0 0x3c
    + 0x4a002564 0x8
    + 0x4a002574 0x50>;
    + compatible = "ti,dra752-bandgap";
    + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
    + #thermal-sensor-cells = <1>;
    + };
    +
    sdma: dma-controller@4a056000 {
    compatible = "ti,omap4430-sdma";
    reg = <0x4a056000 0x1000>;
    --
    1.8.2.1.342.gfa7285d


    \
     
     \ /
      Last update: 2013-11-06 21:41    [W:4.308 / U:0.484 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site