Messages in this thread Patch in this message | | | From | Laxman Dewangan <> | Subject | [PATCH V2 2/5] mfd: as3722: add DT details for clock support of ams AS3722 | Date | Wed, 6 Nov 2013 17:48:20 +0530 |
| |
Add DT details for using the clocks from ams AS3722.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> --- Changes from V1: - This is new patch of series which was part of code change, splitting it on different change.
Documentation/devicetree/bindings/mfd/as3722.txt | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt index fc2191e..e782f39 100644 --- a/Documentation/devicetree/bindings/mfd/as3722.txt +++ b/Documentation/devicetree/bindings/mfd/as3722.txt @@ -112,6 +112,15 @@ Following are properties of regulator subnode. ams,enable-tracking: Enable tracking with SD1, only supported by LDO3. +Clock: +====== +AS3722 supports one 32KHz clock to output from device. The clock control is +provided through the clock driver. +This binding uses the common clock binding ./clock-bindings.txt. +The device node should have the optional properties to support the clock: +#clock-cells: from common clock binding; shall be set to 1. The clock id for + single clock output is 0. + Example: -------- #include <dt-bindings/mfd/as3722.h> -- 1.7.1.1
| |