Messages in this thread Patch in this message |  | | From | Sricharan R <> | Subject | [PATCH V3 3/7] ARM: DTS: DRA: Add crossbar device binding | Date | Tue, 5 Nov 2013 18:44:13 +0530 |
| |
This adds the irq crossbar device node.
There is a IRQ crossbar device in the soc, which maps the irq requests from the peripherals to the mpu interrupt controller's inputs. The Peripheral irq requests are connected to only one crossbar input and the output of the crossbar is connected to only one controller's input line. The crossbar device is used to map a peripheral input to a free mpu's interrupt controller line.
Cc: Benoit Cousson <bcousson@baylibre.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> --- arch/arm/boot/dts/dra7.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index d0df4c4..cf0d6ca 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -583,4 +583,12 @@ status = "disabled"; }; }; + + crossbar_mpu: crossbar@4a020000 { + compatible = "ti,irq-crossbar"; + reg = <0x4a002a48 0x130>; + ti,max-irqs = <160>; + ti,reg-size = <2>; + ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>; + }; }; -- 1.7.9.5
|  |