lkml.org 
[lkml]   [2013]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v6 00/11] VFS hot tracking
From
HI,

Ping again....

On Thu, Nov 21, 2013 at 9:57 PM, Zhi Yong Wu <zwu.kernel@gmail.com> wrote:
> HI, Maintainers
>
> Ping again....
>
> On Thu, Nov 14, 2013 at 2:33 AM, Zhi Yong Wu <zwu.kernel@gmail.com> wrote:
>> Ping....
>>
>> On Wed, Nov 6, 2013 at 9:45 PM, Zhi Yong Wu <zwu.kernel@gmail.com> wrote:
>>> From: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
>>>
>>> The patchset is trying to introduce hot tracking function in
>>> VFS layer, which will keep track of real disk I/O in memory.
>>> By it, you will easily know more details about disk I/O, and
>>> then detect where disk I/O hot spots are. Also, specific FS
>>> can take use of it to do accurate defragment, and hot relocation
>>> support, etc.
>>>
>>> Now it's time to send out its V6 for external review, and
>>> any comments or ideas are appreciated, thanks.
>>>
>>> NOTE:
>>>
>>> The patchset can be obtained via my kernel dev git on github:
>>> git://github.com/wuzhy/kernel.git hot_tracking
>>> If you're interested, you can also review them via
>>> https://github.com/wuzhy/kernel/commits/hot_tracking
>>>
>>> For how to use and more other info and performance report,
>>> please check hot_tracking.txt in Documentation and following
>>> links:
>>> 1.) http://lwn.net/Articles/525651/
>>> 2.) https://lkml.org/lkml/2012/12/20/199
>>>
>>> This patchset has been done scalability or performance tests
>>> by fs_mark, ffsb and compilebench.
>>>
>>> The perf testings were done on Linux 3.12.0-rc7 with Model IBM,8231-E2C
>>> Big Endian PPC64 with 64 CPUs and 2 NUMA nodes, 250G RAM and 1.50 TiB
>>> test hard disk where each test file size is 20G or 100G.
>>> Architecture: ppc64
>>> Byte Order: Big Endian
>>> CPU(s): 64
>>> On-line CPU(s) list: 0-63
>>> Thread(s) per core: 4
>>> Core(s) per socket: 1
>>> Socket(s): 16
>>> NUMA node(s): 2
>>> Model: IBM,8231-E2C
>>> Hypervisor vendor: pHyp
>>> Virtualization type: full
>>> L1d cache: 32K
>>> L1i cache: 32K
>>> L2 cache: 256K
>>> L3 cache: 4096K
>>> NUMA node0 CPU(s): 0-31
>>> NUMA node1 CPU(s): 32-63
>>>
>>> Below is the perf testing report:
>>>
>>> Please focus on the two key points:
>>> - The overall overhead which is injected by the patchset
>>> - The stability of the perf results
>>>
>>> 1. fio tests
>>>
>>> w/o hot tracking w/ hot tracking
>>>
>>> RAM size 32G 32G 16G 8G 4G 2G 250G
>>>
>>> sequential-8k-1jobs-read 61260KB/s 60918KB/s 60901KB/s 62610KB/s 60992KB/s 60213KB/s 60948KB/s
>>>
>>> sequential-8k-1jobs-write 1329KB/s 1329KB/s 1328KB/s 1329KB/s 1328KB/s 1329KB/s 1329KB/s
>>>
>>> sequential-8k-8jobs-read 91139KB/s 92614KB/s 90907KB/s 89895KB/s 92022KB/s 90851KB/s 91877KB/s
>>>
>>> sequential-8k-8jobs-write 2523KB/s 2522KB/s 2516KB/s 2521KB/s 2516KB/s 2518KB/s 2521KB/s
>>>
>>> sequential-256k-1jobs-read 151432KB/s 151403KB/s 151406KB/s 151422KB/s 151344KB/s 151446KB/s 151372KB/s
>>>
>>> sequential-256k-1jobs-write 33451KB/s 33470KB/s 33481KB/s 33470KB/s 33459KB/s 33472KB/s 33477KB/s
>>>
>>> sequential-256k-8jobs-read 235291KB/s 234555KB/s 234251KB/s 233656KB/s 234927KB/s 236380KB/s 235535KB/s
>>>
>>> sequential-256k-8jobs-write 62419KB/s 62402KB/s 62191KB/s 62859KB/s 62629KB/s 62720KB/s 62523KB/s
>>>
>>> random-io-mix-8k-1jobs [READ] 2929KB/s 2942KB/s 2946KB/s 2929KB/s 2934KB/s 2947KB/s 2946KB/s
>>> [WRITE] 1262KB/s 1266KB/s 1257KB/s 1262KB/s 1257KB/s 1257KB/s 1265KB/s
>>>
>>> random-io-mix-8k-8jobs [READ] 2444KB/s 2442KB/s 2436KB/s 2416KB/s 2353KB/s 2441KB/s 2442KB/s
>>> [WRITE] 1047KB/s 1044KB/s 1047KB/s 1028KB/s 1017KB/s 1034KB/s 1049KB/s
>>>
>>> random-io-mix-8k-16jobs [READ] 2182KB/s 2184KB/s 2169KB/s 2178KB/s 2190KB/s 2184KB/s 2180KB/s
>>> [WRITE] 932KB/s 930KB/s 943KB/s 936KB/s 937KB/s 929KB/s 931KB/s
>>>
>>> The above perf parameter is the aggregate bandwidth of threads in the group;
>>> If you hope to know how about other perf parameters, or fio raw results, please let me know, thanks.
>>>
>>> 2. Locking stat - Contention & Cacheline Bouncing
>>>
>>> RAM size class name con-bounces contentions acq-bounces acquisitions cacheline bouncing locking contention
>>> ratio ratio
>>>
>>> &(&root->t_lock)->rlock: 1508 1592 157834 374639292 0.96% 0.00%
>>> 250G &(&root->m_lock)->rlock: 1469 1484 119221 43077842 1.23% 0.00%
>>> &(&he->i_lock)->rlock: 0 0 101879 376755218 0.00% 0.00%
>>>
>>> &(&root->t_lock)->rlock: 2912 2985 342575 374691186 0.85% 0.00%
>>> 32G &(&root->m_lock)->rlock: 188 193 307765 8803163 0.00% 0.00%
>>> &(&he->i_lock)->rlock: 0 0 291860 376756084 0.00% 0.00%
>>>
>>> &(&root->t_lock)->rlock: 3863 3948 298041 374727038 1.30% 0.00%
>>> 16G &(&root->m_lock)->rlock: 220 228 254451 8687057 0.00% 0.00%
>>> &(&he->i_lock)->rlock: 0 0 235027 376756830 0.00% 0.00%
>>>
>>> &(&root->t_lock)->rlock: 3283 3409 233790 374722064 1.40% 0.00%
>>> 8G &(&root->m_lock)->rlock: 136 139 203917 8684313 0.00% 0.00%
>>> &(&he->i_lock)->rlock: 0 0 193746 376756438 0.00% 0.00%
>>>
>>> &(&root->t_lock)->rlock: 15090 15705 283460 374889666 5.32% 0.00%
>>> 4G &(&root->m_lock)->rlock: 172 173 222480 8555052 0.00% 0.00%
>>> &(&he->i_lock)->rlock: 0 0 206431 376759452 0.00% 0.00%
>>>
>>> &(&root->t_lock)->rlock: 25515 27368 305129 375394828 8.36% 0.00%
>>> 2G &(&root->m_lock)->rlock: 100 101 216516 6752265 0.00% 0.00%
>>> &(&he->i_lock)->rlock: 0 0 214713 376765169 0.00% 0.00%
>>>
>>> 3. Perf test - Cacheline Ping-pong
>>>
>>> w/o hot tracking w/ hot tracking
>>>
>>> RAM size 32G 32G 16G 8G 4G 2G 250G
>>>
>>> cache-references 1,264,996,437,581 1,401,504,955,577 1,398,308,614,801 1,396,525,544,527 1,384,793,467,410 1,432,042,560,409 1,571,627,148,771
>>>
>>> cache-misses 45,424,567,057 58,432,749,807 59,200,504,032 59,762,030,933 58,104,156,576 57,283,962,840 61,963,839,419
>>>
>>> seconds time elapsed 22956.327674298 23035.457069488 23017.232397085 23012.397142967 23008.420970731 23057.245578767 23342.456015188
>>>
>>> cache-misses ratio 3.591 % 4.169 % 4.234 % 4.279 % 4.196 % 4.000 % 3.943 %
>>>
>>> Changelog from v5:
>>> - Also added the hook hot_freqs_update() in the page cache I/O path,
>>> not only in real disk I/O path [viro]
>>> - Don't export the stuff until it's used by a module [viro]
>>> - Splitted hot_inode_item_lookup() [viro]
>>> - Prevented hot items from being re-created after the inode was unlinked. [viro]
>>> - Made hot_freqs_update() to be inline and adopt one private hot flag [viro]
>>> - Killed hot_bit_shift() [viro]
>>> - Used file_inode() instead of file->f_dentry->d_inode [viro]
>>> - Introduced one new file hot_tracking.h in include/uapi/linux/ [viro]
>>> - Made the checks for ->i_nlink to be protectd by ->i_mutex [viro]
>>>
>>> v5:
>>> - Added all kinds of perf testing report [viro]
>>> - Covered mmap() now [viro]
>>> - Removed list_sort() in hot_update_worker() to avoid locking contention
>>> and cacheline bouncing [viro]
>>> - Removed a /proc interface to control low memory usage [Chandra]
>>> - Adjusted shrinker support due to the change of public shrinker APIs [zwu]
>>> - Fixed the locking missing issue when hot_inode_item_put() is called
>>> in ioctl_heat_info() [viro]
>>> - Fixed some locking contention issues [zwu]
>>>
>>> v4:
>>> - Removed debugfs support, but leave it to TODO list [viro, Chandra]
>>> - Killed HOT_DELETING and HOT_IN_LIST flag [viro]
>>> - Fixed unlink issues [viro]
>>> - Fixed the issue on lookups (both for inode and range)
>>> leak on race with unlink [viro]
>>> - Killed hot_comm_item and split the functions which take it [virio]
>>> - Fixed some other issues [zwu, Chandra]
>>>
>>> v3:
>>> - Added memory caping function for hot items [Zhiyong]
>>> - Cleanup aging function [Zhiyong]
>>>
>>> v2:
>>> - Refactored to be under RCU [Chandra Seetharaman]
>>> Merged some code changes [Chandra Seetharaman]
>>> - Fixed some issues [Chandra Seetharaman]
>>>
>>> v1:
>>> - Solved 64 bits inode number issue. [David Sterba]
>>> - Embed struct hot_type in struct file_system_type [Darrick J. Wong]
>>> - Cleanup Some issues [David Sterba]
>>> - Use a static hot debugfs root [Greg KH]
>>>
>>> rfcv4:
>>> - Introduce hot func registering framework [Zhiyong]
>>> - Remove global variable for hot tracking [Zhiyong]
>>> - Add btrfs hot tracking support [Zhiyong]
>>>
>>> rfcv3:
>>> 1.) Rewritten debugfs support based seq_file operation. [Dave Chinner]
>>> 2.) Refactored workqueue support. [Dave Chinner]
>>> 3.) Turn some Micro into be tunable [Zhiyong, Liu Zheng]
>>> TIME_TO_KICK, and HEAT_UPDATE_DELAY
>>> 4.) Cleanedup a lot of other issues [Dave Chinner]
>>>
>>>
>>> rfcv2:
>>> 1.) Converted to Radix trees, not RB-tree [Zhiyong, Dave Chinner]
>>> 2.) Added memory shrinker [Dave Chinner]
>>> 3.) Converted to one workqueue to update map info periodically [Dave Chinner]
>>> 4.) Cleanedup a lot of other issues [Dave Chinner]
>>>
>>> rfcv1:
>>> 1.) Reduce new files and put all in fs/hot_tracking.[ch] [Dave Chinner]
>>> 2.) The first three patches can probably just be flattened into one.
>>> [Marco Stornelli , Dave Chinner]
>>>
>>>
>>> Dave Chinner (1):
>>> VFS hot tracking, xfs: Add hot tracking support
>>>
>>> Zhi Yong Wu (10):
>>> VFS hot tracking: Define basic data structures and functions
>>> VFS hot tracking: Track IO and record heat information
>>> VFS hot tracking: Add a workqueue to move items between hot maps
>>> VFS hot tracking: Add shrinker functionality to curtail memory usage
>>> VFS hot tracking: Add an ioctl to get hot tracking information
>>> VFS hot tracking: Add a /proc interface to make the interval tunable
>>> VFS hot tracking: Add a /proc interface to control memory usage
>>> VFS hot tracking: Add documentation
>>> VFS hot tracking, btrfs: Add hot tracking support
>>> MAINTAINERS: add the maintainers for VFS hot tracking
>>>
>>> Documentation/filesystems/00-INDEX | 2 +
>>> Documentation/filesystems/hot_tracking.txt | 207 ++++++++
>>> MAINTAINERS | 12 +
>>> fs/Makefile | 2 +-
>>> fs/btrfs/ctree.h | 1 +
>>> fs/btrfs/super.c | 22 +-
>>> fs/compat_ioctl.c | 5 +
>>> fs/dcache.c | 2 +
>>> fs/hot_tracking.c | 816 +++++++++++++++++++++++++++++
>>> fs/hot_tracking.h | 72 +++
>>> fs/ioctl.c | 71 +++
>>> fs/namei.c | 4 +
>>> fs/xfs/xfs_mount.h | 1 +
>>> fs/xfs/xfs_super.c | 18 +
>>> include/linux/fs.h | 4 +
>>> include/linux/hot_tracking.h | 107 ++++
>>> include/uapi/linux/fs.h | 1 +
>>> include/uapi/linux/hot_tracking.h | 33 ++
>>> kernel/sysctl.c | 14 +
>>> mm/filemap.c | 24 +-
>>> mm/readahead.c | 6 +
>>> 21 files changed, 1420 insertions(+), 4 deletions(-)
>>> create mode 100644 Documentation/filesystems/hot_tracking.txt
>>> create mode 100644 fs/hot_tracking.c
>>> create mode 100644 fs/hot_tracking.h
>>> create mode 100644 include/linux/hot_tracking.h
>>> create mode 100644 include/uapi/linux/hot_tracking.h
>>>
>>> --
>>> 1.7.11.7
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>>> the body of a message to majordomo@vger.kernel.org
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>> Please read the FAQ at http://www.tux.org/lkml/
>>
>>
>>
>> --
>> Regards,
>>
>> Zhi Yong Wu
>
>
>
> --
> Regards,
>
> Zhi Yong Wu



--
Regards,

Zhi Yong Wu


\
 
 \ /
  Last update: 2013-11-30 11:21    [W:0.066 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site