lkml.org 
[lkml]   [2013]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: "swiotlb buffer is full" with 3.13-rc1+ but not 3.4.
From
Date
On Sat, 2013-11-30 at 13:56 -0500, Konrad Rzeszutek Wilk wrote:
> My theory is that the SWIOTLB is not full - it is just that the request
> is for a compound page that is more than 512kB. Please note that
> SWIOTLB highest "chunk" of buffer it can deal with is 512kb.
>
> And that is of course the question comes out - why would it try to
> bounce buffer it. In Xen the answer is simple - the sg chunks cross page
> boundaries which means that they are not physically contingous - so we
> have to use the bounce buffer. It would be better if the the sg list
> provided a large list of 4KB pages instead of compound pages as that
> could help in avoiding the bounce buffer.
>
> But I digress - this is a theory - I don't know whether the SCSI layer
> does any colescing of the sg list - and if so, whether there is any
> easy knob to tell it to not do it.

Well, SCSI doesn't, but block does. It's actually an efficiency thing
since most firmware descriptor formats cope with multiple pages and the
more descriptors you have for a transaction, the more work the on-board
processor on the HBA has to do. If you have an emulated HBA, like
virtio, you could turn off physical coalesing by setting the
use_clustering flag to DISABLE_CLUSTERING. But you can't do that for a
real card. I assume the problem here is that the host is passing the
card directly to the guest and the guest clusters based on its idea of
guest pages which don't map to contiguous physical pages?

The way you tell how many physically contiguous pages block is willing
to merge is by looking at /sys/block/<dev>/queue/max_segment_size if
that's 4k then it won't merge, if it's greater than 4k, then it will.

I'm not quite sure what to do ... you can't turn of clustering globally
in the guest because the virtio drivers use it to reduce ring descriptor
pressure, what you probably want is some way to flag a pass through
device.

James




\
 
 \ /
  Last update: 2013-11-30 22:21    [W:0.083 / U:0.404 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site