lkml.org 
[lkml]   [2013]   [Nov]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/3 v2] usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
Date


Best regards,
Peter Chen


> -----Original Message-----
> From: linux-usb-owner@vger.kernel.org [mailto:linux-usb-
> owner@vger.kernel.org] On Behalf Of Chris Ruehl
> Sent: Friday, November 29, 2013 3:20 PM
> To: alexander.shishkin@linux.intel.com; gregkh@linuxfoundation.org
> Cc: linux-usb@vger.kernel.org; linux-kernel@vger.kernel.org; Chris Ruehl
> Subject: [PATCH 2/3 v2] usb: chipidea: Fix Internal error: : 808 [#1] ARM
> related to STS flag
>
> usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
>
> * init the sts flag to 0 (missed)
> * set the sts flag only if not 0
>
> Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
> ---
> drivers/usb/chipidea/core.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 5075407..1a6010e 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -245,6 +245,8 @@ static void hw_phymode_configure(struct ci_hdrc *ci)
> {
> u32 portsc, lpm, sts = 0;
>
> switch (ci->platdata->phy_mode) {
> case USBPHY_INTERFACE_MODE_UTMI:
> portsc = PORTSC_PTS(PTS_UTMI);
> @@ -273,10 +275,12 @@ static void hw_phymode_configure(struct ci_hdrc *ci)
>
> if (ci->hw_bank.lpm) {
> hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
> - hw_write(ci, OP_DEVLC, DEVLC_STS, sts);
> + if (sts)
> + hw_write(ci, OP_DEVLC, DEVLC_STS, sts);
> } else {
> hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
> - hw_write(ci, OP_PORTSC, PORTSC_STS, sts);
> + if ( sts )
> + hw_write(ci, OP_PORTSC, PORTSC_STS, sts);
> }
> }
>
> --

Acked-by: Peter Chen <peter.chen@freescale.com>

Peter




\
 
 \ /
  Last update: 2013-11-29 10:01    [W:0.075 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site